The foundation should be cleaned before tiling, for example, lime plaster, latex paint, wallpaper, etc. on the wall, or dirt on the ground, must be cleaned, otherwise the cement mortar and the grass-roots layer will not be firmly bonded; in addition, if the wall itself There are cracks that should be properly treated before being allowed to be tiled so as to prevent cracking or shedding of the wall tiles in the future when the basic structure cracks become large; and also for the floor and wall surfaces where the flatness or verticality gap is too large. The mortar is leveled.
<<<Link: Acceptance Reference for Wall Tiles in Home Decorations
Posted floor tiles should be from the inside to the outside, such as the slope of the ground or there are leaks children, should pay attention to the direction of the drainage slope; wall tiles should be laid from the bottom, for the sake of beauty, the bottom of the brick should be posted. After pressing the tiles, press the floor tiles. When there are half bricks, you should try to place them below. In addition, a wall cannot be attached to the top at a time to prevent the tile from being heavy and causing it to fall.
Wall tiles have a high moisture content and must be considered when pasting. The tile base should be fully moistened before it is tiled, and ceramic tiles should also be soaked in water for at least 20 minutes before use. Otherwise, the moisture in the mortar is rapidly absorbed by the dried substrate and tiles and condenses quickly, which affects the fastness of the bond. Wall tiles will also absorb moisture from the cement so that the cement does not function as an adhesive. In addition, the water absorption rate of each type of wall tile is not the same, which depends on the experience to grasp.
Tile Laying Tiles Cement Home Improvement Paint Lacquer Wallpapers Floor Tiles Tiles
Aluminium honeycomb panels rely on aviation-grade sheet aluminum for the faces with an aluminum honeycomb in the center. This creates excellent rigidity, but the panels weigh much less. For instance, an aluminum honeycomb panel weighs 1/5th what a solid aluminum panel weighs, and 1/10th of what a solid steel panel weighs.
The honeycomb panel is a revolutionary product that offers superior strength, crack-resistance, ease of installation, and amazing affordability. KM Haus offers two types of honeycomb panels: aluminum and stone. Each utilizes a large format that speeds installation.
Aluminum honeycomb panels are an excellent choice for metallic modern facades on commercial or residential buildings.
Aluminum Honeycomb Panel,Honeycomb Wall Panel,Aluminum Honeycomb Wall Panel,Aluminum Composite Wall Panel
Shenyang Xiandai Jixiang Decorative Material Co., Ltd , https://www.modernbond-acp.com