On January 18th, the report on the prosperity index of the equipment manufacturing industry in the fourth quarter of 2009, jointly prepared by the China Economic Performance Index Research Center and the China Economic Climate Monitoring Center, was officially released. The report shows that in the fourth quarter, the economic prosperity index of the equipment manufacturing industry was 99.7 points (the standard of the economy was 100 points), which has risen for three consecutive quarters, and the industry operation is basically close to the normal level of the economy. The early warning index also rose by 3.3 points from the previous quarter, in a normal “green light zoneâ€. Such a bright figure in the equipment manufacturing industry is undoubtedly benefiting from the industrial adjustment and revitalization plan that was released in May 2009.
In an interview with the reporter of China Sankei Shimbun, Duan Jiaxuan, a researcher in the machinery industry of China Investment Consulting, pointed out that the large-scale infrastructure projects implemented by the state in 2009, including railways, highways, and other infrastructure construction, brought to domestic equipment manufacturers. A lot of opportunities.
Relevant information shows that in the first eight months of 2009, the growth rate of fixed assets investment in equipment manufacturing industry was 38.9%, which was higher than the growth rate of urban fixed assets investment by 5.9 percentage points. The investment in the equipment manufacturing industry expansion and expansion project is growing much faster than the new construction projects, and the proportion of enterprises purchasing new equipment in the investment has also increased, which indicates that enterprises pay more attention to strengthening technological transformation.
The good news is that this good momentum will continue in 2010.
Luo Baihui, an invited researcher at the China International Economic Development Research Center, said in an interview with the China Sankei Shimbun News that due to the damage of manufacturing industry in Europe and the United States and the accelerating investment in public infrastructure construction and machinery infrastructure industry in the developing world, the world The equipment industry market will be very active. In the next five years, China's equipment manufacturing industry will still achieve considerable development.
However, it is undeniable that the internal and external environment facing the development of China's equipment manufacturing industry is still very serious. If the response is weak, the critical period may evolve into a repetitive period, and the result is that if it does not advance, it will retreat. Not long ago, Miao Wei, deputy minister of the Ministry of Industry and Information Technology, pointed out that the world economic recovery is still fragile and unstable, and the momentum of international trade protectionism has risen. The adverse impact on China's economic development is still difficult to fundamentally change in the short term.
Due to the domestic, the basis for the stabilization and recovery of the equipment manufacturing industry is not strong enough, the operational situation is still not stable, and the development of various regions and industries is not balanced. At present, some industrial structures are unreasonable, some overcapacity, and backward production capacity are difficult to eliminate. There is a trend that is further exacerbated.
"If we want to develop sustainable, we must accelerate industrial restructuring and complete industrial upgrading in 2010." Duan Jiaxuan said. He believes that the above-mentioned problems have become difficult problems. Under the national three-and-a-half application, not only have they not been contained, but there will be a trend of further intensification. This is because it is difficult for many regions to cultivate other industries with pillar status while limiting the development of local high-energy and high-pollution industries.
"Integrated consideration of market demand and supporting conditions, energy-saving and new energy vehicles, offshore engineering equipment, general aircraft and regional aircraft, high-speed rail transportation equipment, high-performance ships, etc. can be used as key areas for the cultivation of emerging pillar industries." Luo Baihui said.
Luo Baihui pointed out that what the country needs to do in 2010 also includes: promptly introduce relevant implementation rules; according to the development needs of the industry, propose the direction and focus of this year's technological transformation, do a good job in project reserve, improve key project libraries, and accelerate the establishment of technological transformation. Long-term mechanism; clearly promote the direction and key tasks of major technological equipment autonomy, create a good environment for major technological equipment development and independent innovation; promptly introduce guidance to accelerate the merger and reorganization of equipment manufacturing enterprises, and enhance policy pertinence and operability Efforts will be made to eliminate policy barriers such as cross-regional, cross-industry, and cross-ownership mergers and acquisitions.
"It is also necessary to realize the coordinated development of the mainframe and the supporting components. It will change the industrial policy of heavy mainframes and light supporting. At the same time, it is still necessary to unswervingly promote the localization of major equipment and gradually get rid of import dependence." Duan Jiaxuan said.
In an interview with the reporter of China Sankei Shimbun, Duan Jiaxuan, a researcher in the machinery industry of China Investment Consulting, pointed out that the large-scale infrastructure projects implemented by the state in 2009, including railways, highways, and other infrastructure construction, brought to domestic equipment manufacturers. A lot of opportunities.
Relevant information shows that in the first eight months of 2009, the growth rate of fixed assets investment in equipment manufacturing industry was 38.9%, which was higher than the growth rate of urban fixed assets investment by 5.9 percentage points. The investment in the equipment manufacturing industry expansion and expansion project is growing much faster than the new construction projects, and the proportion of enterprises purchasing new equipment in the investment has also increased, which indicates that enterprises pay more attention to strengthening technological transformation.
The good news is that this good momentum will continue in 2010.
Luo Baihui, an invited researcher at the China International Economic Development Research Center, said in an interview with the China Sankei Shimbun News that due to the damage of manufacturing industry in Europe and the United States and the accelerating investment in public infrastructure construction and machinery infrastructure industry in the developing world, the world The equipment industry market will be very active. In the next five years, China's equipment manufacturing industry will still achieve considerable development.
However, it is undeniable that the internal and external environment facing the development of China's equipment manufacturing industry is still very serious. If the response is weak, the critical period may evolve into a repetitive period, and the result is that if it does not advance, it will retreat. Not long ago, Miao Wei, deputy minister of the Ministry of Industry and Information Technology, pointed out that the world economic recovery is still fragile and unstable, and the momentum of international trade protectionism has risen. The adverse impact on China's economic development is still difficult to fundamentally change in the short term.
Due to the domestic, the basis for the stabilization and recovery of the equipment manufacturing industry is not strong enough, the operational situation is still not stable, and the development of various regions and industries is not balanced. At present, some industrial structures are unreasonable, some overcapacity, and backward production capacity are difficult to eliminate. There is a trend that is further exacerbated.
"If we want to develop sustainable, we must accelerate industrial restructuring and complete industrial upgrading in 2010." Duan Jiaxuan said. He believes that the above-mentioned problems have become difficult problems. Under the national three-and-a-half application, not only have they not been contained, but there will be a trend of further intensification. This is because it is difficult for many regions to cultivate other industries with pillar status while limiting the development of local high-energy and high-pollution industries.
"Integrated consideration of market demand and supporting conditions, energy-saving and new energy vehicles, offshore engineering equipment, general aircraft and regional aircraft, high-speed rail transportation equipment, high-performance ships, etc. can be used as key areas for the cultivation of emerging pillar industries." Luo Baihui said.
Luo Baihui pointed out that what the country needs to do in 2010 also includes: promptly introduce relevant implementation rules; according to the development needs of the industry, propose the direction and focus of this year's technological transformation, do a good job in project reserve, improve key project libraries, and accelerate the establishment of technological transformation. Long-term mechanism; clearly promote the direction and key tasks of major technological equipment autonomy, create a good environment for major technological equipment development and independent innovation; promptly introduce guidance to accelerate the merger and reorganization of equipment manufacturing enterprises, and enhance policy pertinence and operability Efforts will be made to eliminate policy barriers such as cross-regional, cross-industry, and cross-ownership mergers and acquisitions.
"It is also necessary to realize the coordinated development of the mainframe and the supporting components. It will change the industrial policy of heavy mainframes and light supporting. At the same time, it is still necessary to unswervingly promote the localization of major equipment and gradually get rid of import dependence." Duan Jiaxuan said.
Light Duty PVC /TPR Caster Wheels 1.5" for furniture Office chair
1. Use Electrophoretic process
2.Single wheel PU/ PVC material
3.Double ball bearing
Small Caster Wheels,1.5 Inch Furniture Casters,1.5 Inch Caster Wheel,1.5 Inch Furniture Caster Wheels
Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com