Xiamen Dry Ball Automation Technology Co., Ltd. Acting solenoid valve products
Solution for the solenoid valve not working after being energized
Article source: (solenoid valve)
What should I do if the solenoid valve does not work after being energized? Below, the Xiamen Dry Ball Automation Xiaobian is for everyone to summarize the solution to the problem that the solenoid valve does not work after being energized:
1. Check if the power supply's wiring port has poor contact. If it exists, please install the connection of the terminal box connector.
Secondly, it is necessary to check whether the power supply voltage of the solenoid valve is within the specified range of the product. If the power supply voltage is not within the specified range, the solenoid valve may not be able to be normally waged. After the test is completed, further adjustment is made according to the value of the specified range.
Third, once again, the detection solenoid valve has a situation in which the coil is desoldered. If this condition exists, the solenoid valve cannot work normally. The solution is to re-weld the place where the welding is performed.
4. Check if the coil of the solenoid valve is short-circuited. If this is the case, please replace the coil in time.
5. Whether the working pressure difference is suitable for the standard. If there is any inappropriateity, the pressure difference should be adjusted in time, and the proportional solenoid valve can also be replaced.
Sixth, due to the different types and production materials of solenoid valves. If the temperature of the medium is too high, the solenoid valve will not work properly. In this case, you should select the appropriate solenoid valve product in time.
7. Check if there is any debris in the solenoid valve, and clean the inside of the solenoid valve in time. Install the filter according to the Xiamen dry ball automatic installation instructions.
8. If the viscosity of the medium is too large, it will not be within the working range of the solenoid valve, which will also cause the solenoid valve to fail to work properly.
Solution for the solenoid valve does not work after power-on: http://(If there is a reprint, please indicate the source and related links, otherwise pursue its legal responsibility!)
Buy imported solenoid valve contact Xiamen dry ball automation, commonly used brand models are available in stock, can provide agent certificate, certificate of origin and other qualifications! National inquiry hotline (Mr. Xiaofei)
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Elevator Frequency Inverter,Elevator Step Inverter,Step Up Inverter,Step Down Inverter
Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com