Strengthening pretreatment of aluminum scrap Aluminum and its alloys In the manufacturing process, companies often deal with metal surfaces by spraying various coatings or coating various organic (inorganic) materials, among which may be added acids, alkalis, and salts. And oil and other substances. Therefore, aluminum and its products enter the end of life after use or consumption, which itself carries pollutants. In addition, aluminum scrap comes from all corners of the society and is of various types. It has been subjected to various degrees of pollution in the process of recycling and dismantling. It will be mixed with various non-aluminum materials. These inclusions will also undergo physical and chemical reactions during the smelting process. Have a certain impact.
Therefore, attention should be paid to the pretreatment of scrap aluminum so that the contaminated impurities are destroyed before smelting. Pretreatment technologies mainly include: sorting, that is, sorting out non-aluminum materials such as plastics and rubber; washing, that is, washing out oil and other substances in scrap aluminum; removing paint, in order to reduce pollution caused by incomplete combustion of surface coatings of scrap aluminum. Attention should be paid to the paint stripping of the coated aluminum scrap before it is introduced into the furnace.
At the same time as the pretreatment, various non-aluminum materials were also separated and pure aluminum scrap was obtained, which is also a necessary guarantee for smelting high-quality aluminum alloys. As a large number of inclusions have been removed before smelting, the amount of additives is reduced, the smelting cycle is shortened, and the production costs are reduced accordingly, which shows the advantages of environmental management.
Scientifically choosing fuel science to economically select fuels can not only reduce energy consumption but also significantly change the environment. From the current point of view, liquid fuels have better environmental benefits than solid fuels and have higher combustion efficiency; gas fuels have better environmental benefits than liquid fuels and better combustion efficiency. Therefore, when selecting fuels, gas fuels should be used as much as possible. However, due to conditions, gas fuels cannot be used anywhere. At present, many reclaimed aluminum companies have established gas generators that convert solid fuels into gaseous fuels. This not only greatly reduces the pollution brought about by coal combustion, but also reduces the production costs due to the increase in combustion efficiency. This is undoubtedly a science. s Choice.
The additives used in the aluminum industry are recycled without additives that affect the environment, mainly solvents (covering agents) and refining agents. From the various additives currently used, chlorine, hexachloroethane, Zinc chloride and so on. The use of chlorine to refine aluminum melts is rare, but there are applications in some special alloys. Hexachloroethane and zinc chloride are also used. Some manufacturers produce non-toxic refining agents containing large amounts of hexachloroethane. It is recommended that companies choose additives that do not pollute the environment, such as inert gases or nitrogen.
Improve the processing technology of aluminum ash The content of aluminum in aluminum ash is relatively high and must be recycled. In order to avoid pollution from recycling aluminum from aluminum ash, it is recommended that companies with a size use rotary kiln to treat aluminum ash, or press mills to recover aluminum in aluminum ash, so that the pollution caused by the treatment of aluminum ash is reduced to a low level.
Therefore, attention should be paid to the pretreatment of scrap aluminum so that the contaminated impurities are destroyed before smelting. Pretreatment technologies mainly include: sorting, that is, sorting out non-aluminum materials such as plastics and rubber; washing, that is, washing out oil and other substances in scrap aluminum; removing paint, in order to reduce pollution caused by incomplete combustion of surface coatings of scrap aluminum. Attention should be paid to the paint stripping of the coated aluminum scrap before it is introduced into the furnace.
At the same time as the pretreatment, various non-aluminum materials were also separated and pure aluminum scrap was obtained, which is also a necessary guarantee for smelting high-quality aluminum alloys. As a large number of inclusions have been removed before smelting, the amount of additives is reduced, the smelting cycle is shortened, and the production costs are reduced accordingly, which shows the advantages of environmental management.
Scientifically choosing fuel science to economically select fuels can not only reduce energy consumption but also significantly change the environment. From the current point of view, liquid fuels have better environmental benefits than solid fuels and have higher combustion efficiency; gas fuels have better environmental benefits than liquid fuels and better combustion efficiency. Therefore, when selecting fuels, gas fuels should be used as much as possible. However, due to conditions, gas fuels cannot be used anywhere. At present, many reclaimed aluminum companies have established gas generators that convert solid fuels into gaseous fuels. This not only greatly reduces the pollution brought about by coal combustion, but also reduces the production costs due to the increase in combustion efficiency. This is undoubtedly a science. s Choice.
The additives used in the aluminum industry are recycled without additives that affect the environment, mainly solvents (covering agents) and refining agents. From the various additives currently used, chlorine, hexachloroethane, Zinc chloride and so on. The use of chlorine to refine aluminum melts is rare, but there are applications in some special alloys. Hexachloroethane and zinc chloride are also used. Some manufacturers produce non-toxic refining agents containing large amounts of hexachloroethane. It is recommended that companies choose additives that do not pollute the environment, such as inert gases or nitrogen.
Improve the processing technology of aluminum ash The content of aluminum in aluminum ash is relatively high and must be recycled. In order to avoid pollution from recycling aluminum from aluminum ash, it is recommended that companies with a size use rotary kiln to treat aluminum ash, or press mills to recover aluminum in aluminum ash, so that the pollution caused by the treatment of aluminum ash is reduced to a low level.
Capsule Pressure Gauge,Capsule Pressure Sensor,Capsule Dial Gauge,Diaphragm Capsule Pressure Gauge
wuxi kaifeng pressure gauge co., ltd , https://www.wxkfmanometer.com