Door covers and cabinets are common woodworking items in home improvement. When we are doing woodworking, we pay more attention to whether the materials we use are environmentally friendly and have no pollution, and we neglect the quality of the woodworking itself. Here are some of the common problems in woodworking.
1, solid wood, stability
There are too few fixing points for door covers and walls, and such high door covers are only fixed by three small wooden blocks. The degree of sturdiness and stability can be imagined.
The supervisor explained that the fixing of the door frame and the door cover should be multi-position support. After leveling and vertical, glue should be used to reinforce the firmness. Other wood productions, such as window covers, should also be made with reference to this standard.
2, the color of the furniture surface
On the designer's design drawings, the furniture we see is not the color, and the color difference on the surface of the furniture is also obvious.
Supervision explanation: According to the regulations, the furniture surface should have no obvious color difference, and is consistent with the color and style of the design drawings. When making furniture, use wood veneer for decoration, and everyone must select the style that is closest to the design drawings. When constructing, pay attention to materials with obvious colors to avoid affecting the effect.
3, workmanship must be fine
After the shoe was made, the appearance was quite good, but when it was closed, it was discovered that it was not close enough, and how it was shut, it would still leave such a large gap.
Supervisor explained: Carpentry may seem simple, but in fact it is also very stressful. For shoe cabinets and lockers, the door panels should be flexible, neatly cut, and tightly seamed.
4, wood products also pay attention to horizontal vertical
The locker in production. The horizontal and vertical materials are spliced ​​very tightly, and they are horizontal and vertical. This is not only for aesthetic reasons, but also to ensure the stability and durability of the cabinet.
Supervision explained: According to regulations, good wood products should be straight lines, straight corners, not exposed nail caps. The installation position is correct, the cutting angle is neat, the joints are tight, and the wall is tight.
>>>Related Links: Comprehensive Acceptance of Carpenter Mason Painters Like No shortage
Decoration Carpentry Knowledge Furniture Brand Villa Design Furniture Decoration Home Decoration Window Paint Locker Cabinet Cabinet Door
Washroom Thumb Turns And Indicating Bolts
Here at Leader Hardware we supply full toilet cubicle hardware packs that include all the necessary parts to do this. Both individual fittings and our full cubicle hardware packs are available in a variety of styles and finishes.
We have fittings for all types of cubicles, including ambulant disabled cubicles, glass cubicles, and those with flush fitting doors. You can find locks, hinges, headrails, angle brackets, and fixing clamps along with all the other fittings you may need in our product range.
Lavatory Indicating Door Bolt,Washroom Bolts,Washroom Thumb Turns Bolts,Washroom Indicating Bolts
Leader Hardware Manufacturer Limited , https://www.leaderhardwarecn.com