>>>Related Links: Important factors to pay attention to when buying tiles
1, the tiles are completely loose
In this case, the processing method is relatively simple, first carefully remove the bulging tiles, and then clean the dust and impurities on the back of the tile and the grassroots part of the ground, and use a special tile adhesive to paste. Because it is a floor tile, there is a certain requirement for its compressive resistance. When pasting, the tile adhesive on the back of the tile can be evenly applied on the back of the brick, avoiding the emptying of the tile as much as possible. (Of course, the best method is to use cement mortar paste as well.
2, the tiles are not completely loose
The difficulty in dealing with this problem is that when you take out the tiles, it may cause damage to the tiles. This may involve the replacement of damaged tiles. If you do not reserve spare tiles, then you should sell them with your tiles at that time. Whether or not the product can find the same color number (the same model of product, if not the same batch of production, the color may be different) of the product, to make up some of the same color tiles. The tile is split from the center and the crowbar is used to carefully move the damaged tiles from the center to the periphery. This will not damage the surrounding tiles. After removing the tile, follow the above first rule. The method can be processed. It can also be processed by grouting, that is, the cement mortar mixed with 108 glue penetrates into the bottom of the tile from the gap of the tile to be processed. (This method of treatment is a palliative method that does not completely solve the looseness of the tiles. It may take longer after the looseness.)
3 Note: After the tiles have been treated as described above, do not walk on the tiles until the tiles are dry!
Experience on cement tile adhesive
Waterproof Eptfe Tape,Eptfe Joint Sealant,Ptfe Elastic Tape,Ptfe Adhesive Tape
Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com