Wallpaper steps

1, first of all measure the size of the wall.
2. Eradicate the wall: remove the original paint, wallpaper and other objects on the wall. If there are cracks or potholes on the wall, use gypsum powder to replenish these areas and put a bandage on the surface; if there is a dusty wall or a partition wall, stick a glass cloth or a good cloth; some poor quality partitions Or to achieve the insulation effect of the external wall, full nail plasterboard.
3, cut wallpaper: measure the height of the wall to the baseboard, and then cut the wallpaper. Don't add 10 centimeters to the wall height of the flower wallpaper, use it for trimming the edges; need to consider the symmetry of the pattern, need more than 10 centimeters, and from the top should be on the flower, plan after cutting, numbering, So you can paste them in order. In addition, the cut wallpaper should generally be soaked in clean water for 10 minutes before brushing.
4, brush base film greasy: brush the bottom film, the base film even brush on the wall, the thickness of moderate; scraping putty, polished. Two batches of scraping putty on the wall. After the putty is air-dried, use a sandpaper to polish the wall surface, remove uneven granules, make the wall smooth and flat, and use the base film to evenly paint the wall (cover paint), without being too thick. This will prevent the walls from absorbing the wallpaper glue, sticking the wallpaper on the wall and making the walls even.
5, brush glue, in order to ensure a solid paste, wallpaper back and wall should brush, glue to brush evenly, can not wrap, play heap, to prevent dirty wallpaper. Gum on the wall, the width should be 30 mm wider than the wallpaper. After brushing on the back of the wallpaper, the glue is placed on the face and folded for 5 minutes. It can prevent the glue surface from drying out quickly and is not easily contaminated.
6, cut wallpaper. Before cutting, it is necessary to measure the length. The standard wallpaper is 10 meters long and 0.52 meters wide. It can store 5.2 square meters. The other two specifications are 7 square/roll, 16 square/roll.
7, paste: The principle is the first vertical level, first up and down, first high and low. When affixing the first piece of paper, look for a reference line at the corner of the wall, gently press down from the top to the bottom, from the center to the sides, and scrape with a scraper to make the wallpaper and the wall stick. When affixing the second wallpaper, overlap with the overlap of the first paper web by 20 mm, divide the overlapping portion with a wallpaper knife, remove the remaining portion, and scrape with a scraper. It should be noted that the glue that is squeezed out of the wallpaper should be wiped clean with a wet towel in time to prevent the wallpaper from turning yellow.

Wall Construction Wallpaper Glass Coating Paint

Led Neon Flex Silicon Tube

We offer customized solutions, OEM, ODM service. Wholesalers, distributors, dealers, traders, agents are welcome to purchase in bulk with us.All our LED Neon Rope Lights are more than IP65 waterproof tested and certificated, ensuring high performance and long lifetime.If you have customized need for bulk RGB LED Neon,we can offer custom Led Neon Flex Strip Light with custom color, size, long, CRI, and various accessories especiallly led silicone tube,silicon flex tube,led silicone neon tube,Neon Silicone Tube,Custom Led Silicone Tube. We can also provide a PCB level customized LED Neon Light solution. With our LED Neon light bulk order serivce, you can get as many projects as possible.

led flexible neon strip