How electronic scales are tested

Industrial electronic scales have many types of products. The conventional ones are divided into platform scales, floor scales, truck scales, etc. The factory inspection process is also not the same. This article describes how the product is commissioned and shipped after assembly.

Taking an electronic platform scale as an example, a platform scale is a floor scale with a weighing range of less than 500kg and a table size of less than 60*80cm, with a sensor in the middle of the scale body.

In the first step of debugging the electronic platform scale, the sensor is fixed between the two scale frames by screws and gaskets. The sensor cable is fixed after being led out from the position of the pole, and the aviation head is welded on the other end of the sensor.

The second step, screw on the balance foot to level, cover the weighing pan, aviation head and instrument link after boot.

The third step is to calibrate the weight according to the required range. The fourth step, after the calibration is successful, uses the weight to press the body of the scale to do the test. After the commissioning, there is no error or within the error range of the production is a qualified product. The most critical thing in electronic platform scale packaging and shipping is: To ensure that the sensor is not damaged by external forces during transportation, our technicians will place four protective bolts on the periphery of the scale body to withstand the scale body.

As the standard of weighing, electronic scales are also very important in the use of various fields. Therefore, the standard of our company in the factory assembly and inspection is also very rigorous. This chapter is only a brief introduction to the general process, and I hope to have something for my colleagues. help.