China's solid wood furniture industry is currently in good development. The Zhiyan Data Research Center shows that with the continuous expansion of China's solid wood furniture industry, China's solid wood furniture industry will usher in a new development opportunity. Below Vidal furniture will take you to understand what the characteristics of solid wood furniture are.
advantage
1. After the solid wood panels are painted, there is no unevenness on the surface of the rubber joints and slats, and the physical properties are relatively stable during long-term use;
Second, the high utilization rate of wood is in line with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, solid wood panel decoration board is more suitable for the use of furniture and decorative functions;
3. Although the amount of glue applied to the solid wood panel is larger than that of the solid wood panel, the protection of the double-sided thick veneer and the edge of the four-sided thick veneer are actually only two sides and eight sides of the glue joint, so the adhesive in the solid wood panel The chemical substances volatilized through the glue joint are far lower than the volatilization amount of the solid wood wide board and the solid wood laminated material, which is more environmentally friendly and healthier.
4. Because the core board is made of wood with anisotropic smallness, the surface of the board is uneven and the degree of warpage is small. The upper and lower sides are covered with two thin wooden veneers, which can better eliminate the warpage and cracking of the board surface. Deformation, and can improve the physical strength of the board in all directions;
5. Sliced ​​thin wood veneer is a superior log of selected large diameter grade, and is selected according to the strict selection of texture and color, and is made by high precision equipment and scientific planing method. Such processing technology is very good in texture and color, and the texture is more prominent after painting. The production of the positive furniture can create a sense of harmony and high-grade value.
Disadvantage
The main disadvantage of solid wood furniture solid wood furniture is that it is easy to deform and difficult to maintain. For example, you can't let the sun shine directly, you can't overheat and overheat, too dry and humid environment is not suitable for solid wood furniture; if you don't pay attention when using it, frequent switching air conditioners cause excessive temperature and humidity changes, even qualified solid wood furniture products sometimes Deformation and cracking can also occur. It can be said that no matter what kind of wood is used and how to work, it is difficult to avoid these problems.
Downlights do not occupy space, which can increase the soft atmosphere of the space. If you want to create a warm feeling, you can try to install multiple downlights to reduce the pressure of the space. It is generally used in hotels, families and coffee shops.
Recessed Downlight,Surface Downlight,Adjustable Downlight,Panel Light
JINGYING , https://www.jingyingoptical.com