In recent years, simple wardrobes have gradually been used by the majority of owners, because they are easy to carry and can be folded and can achieve the basic effects of other wardrobes, which are widely favored. The simple cloth wardrobe is one of the simple wardrobes. The simple cloth wardrobe is especially suitable for renting houses or students in the bedroom. Then, after the simple cloth wardrobe is bought, not everyone will install it. The simple wardrobe is easy to install, but it is also a problem for some girls in the school. Next, let's take a look at the simple wardrobe or simple fabric wardrobe installation skills.
The first step, simple cloth wardrobe installation equipment preparation
Many of the simple wardrobes that have been bought have the steel pipes of the simple wardrobes with the marked numbers, and they can be put together with the same number. Then find out the parts of the simple cloth wardrobe chassis and put them together. Note that it is only the bottom part of the simple wardrobe. There are some simple cloth wardrobes with shoe racks, you must first install the simple wardrobe shoe rack part. Then, the bottom of the simple wardrobe board is installed in a number of places, and then the simple wardrobe is classified into pieces, and finally the position of the simple wardrobe classification board is placed.
The second step, the pre-installation of the simple wardrobe
When installing, the simple wardrobe body is facing down, and the simple wardrobe is installed from left to right or from right to left. After assembling the simple wardrobe panel, please ensure that the diagonal error of the cabinet is within plus or minus 1MM. After measuring the diagonal of the simple wardrobe, please mark the side plates or the vertical plate of the back panel on the side panels of the simple cloth wardrobe to facilitate the nail backing.
The third step, the middle of the simple wardrobe installation
After placing the simple wardrobe body in place, please use the level ruler to measure whether the simple wardrobe body is level. If it is not horizontal, please adjust it to the horizontal position. The common method is to put things under the simple wardrobe. After the level of the simple wardrobe cabinet is horizontal, it can be installed in order: clothes rail and drawer. Door panel or sliding door. After the telescopic mirror, install the handle according to your own simple wardrobe requirements.
The fourth step, the simple cloth wardrobe installation later
In the later stage of the installation of the simple wardrobe, you need to pay attention. The second step is not to put the rest of the shelves, but to put on the cloth of the simple wardrobe. Open the zipper of the simple closet cloth, and the middle sticky place is also pulled open, bottom down. There are some small holes dug in the bottom of the simple cloth closet cloth. According to each hole, the cloth of the simple cloth closet is pulled down from the top and down, and the bottom of the simple wardrobe can be pulled first. Then put the rest of the simple wardrobe pipe inside the cloth, then pull the cloth of the simple wardrobe up, cover the top of the tube, and adjust the top of the simple wardrobe until the cloth of the simple cloth wardrobe looks flat without wrinkles. So, the simple cloth wardrobe installation is basically done.
Wire Mesh,Steel Grating,Steel Wire Mesh,Wire Mesh Panels
Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.xinlongfence.com