The shower room can give a soothing soothing to the exhausted body, allowing the warm water to wash away the tiredness of the day, enjoy the care and comfort of the water, and provide a sensory feast for every cell of the body. So how to buy a shower? Follow the small series together into the Drake shower room, for you to choose to buy shower room five key.
Drake shower room choose to shower shower five key
Shower room quality requirements:
Glass
Glass is divided into ordinary glass, semi-tempered glass and fully tempered glass. In the choice of shower glass, in order to ensure the safety of consumers when using, must use strict tempered glass. Tempered glass also has a lot of differences, first of all depends on the advantages and disadvantages of glass is the original glass factory equipment, technology, technology, management and other aspects. The original glass sheet is smelted from silicate. If the equipment, technology, and technology of the original glass factory are not used, the original glass sheet produced will have bubbles, pinholes, black spots, white spots, and haze. . Among all domestic glass processing plants, only Shanghai Yaopi Co., Ltd. and Shenzhen South Glass Works Co., Ltd. have the most advanced production equipment and technologies. The original glass produced is less contaminated and has good permeability. It supplies such vehicles as Audi and Guangzhou Honda. Manufacturing factory.
In addition, in the process of tempering, the original glass sheet requires the equipment, technology and management of the steel plant to be excellent. In the heating process, the optimum temperature of the tempering furnace is about 695 degrees Celsius. The high temperature will make the glass strength low and fragile. Low and uneven glass particles even large and sharp, leaving security risks. The national standard for toughened glass is 50 × 50 area ≥ 40 grains. Nowadays, many shower rooms manufactured by shower room manufacturers that do not pursue quality, in order to control costs, choose some manufacturers who produce glass for construction or manufacturers whose quality is not as good as they are. Because of the limitation of equipment and scale, the quality of the shower room will be discussed. The low-grade shower room is generally constructed of incompletely tempered glass. Therefore, the glass has low purity, and there are disadvantages such as small pinhole black spots and bubbles on the surface. The permeability is not high, and the tempering coefficient of the glass is also low. Non-uniformity, appreciation and sharp sharp corners, each area of ​​50 × 50 is less than 40, thus leaving security risks, so use a newspaper to clean the glass when distinguishing, carefully observe the naked eye will find that the above residual defects in the low shower room .
2. Aluminum alloy
Aluminum is a kind of metal element extracted from aluminum ore. The best country in the world to produce aluminum ore is Canada, followed by China and Australia. China has many bases for producing aluminum ore, such as Guizhou, Shanxi, and Gansu, among which the best one is Guizhou, which is the best aluminum ore. Aluminum in Guangdong Zhongshan is made of aluminum ingot from China's Guizhou Province combined with Aluminium's aluminum ingot - commonly known as Zhongshan Aluminum. Zhongshan Aluminum has a high reputation in the aluminum industry. It belongs to industrial-grade aluminum and is a national Exempt products. In Nanhai, Foshan, Guangdong, there are a large number of aluminum products for construction use. These aluminum products are mostly processed with low-priced aluminum ingots, and even use recycled aluminum scrap for secondary processing. They are said to be used to make aluminum and are widely used in doors and windows. Above the frame, some low-end shower room manufacturers use such aluminum shower enclosures to reduce costs.
Comparison of aluminum methods: poor quality from the surface treatment to see if there is color, lines, trachoma; see whether the aluminum incision is shiny, whether it is smooth, whether there is a glitch, a good aluminum incision gloss, flat, no burr, On the contrary, it is a low-grade aluminum material, and the hard aluminum material will be weak; the weight of the entire body is suspended on the crossbeam of the shower room to prove the bearing capacity.
3, pulley
Pulleys are the most important thing in push-pull shower rooms. Only the structurally reasonable and well-made pulleys can guarantee the service life of the shower room and the safety of consumers. Some high-end shower rooms use double pulleys trapezoidal with V-shaped track design, V-track design is not easy to wear, no false position, no shaking.
The pulleys used in the low shower room are roughly:
A, carbon steel pulley - This kind of pulley is easy to rust, brittle, easily corroded, the bearing part of the pulley is black, and the outer bag is white plastic.
B, Zinc alloy pulleys - This material is also susceptible to rust, brittle and easy to break, the black rubber on the pulley outside the friction is easy to fall off.
C. Copper shaft rubber coated pulley design - this kind of pulley is the most common. The middle part is yellow copper with steel balls inside. The outside is white PVC material. The friction between copper, steel ball and plastic is easy to wear. The pulley gap is large and the dust is easy to enter. Stabbed steel ball, resulting in damage to the rubberized pulley.
4, see the overall structure of the shower room, hardware
Some high-end shower rooms in the structure are very concerned about the design of the shower room waterproof and adjust the design of the function, such as the vertical and horizontal direction adjustment function, can be corrected due to cement workers and installation workers caused by the deviation. High-grade shower room hardware accessories are mostly made of stainless steel fittings, and stainless steel fittings, among which 304 is hand-polished stainless steel, are the best.
Some of the low-end shower room FAQs have the following:
A. The track design adopts a U-shaped design of 90 degrees in full, and the bottom rail is also a U-shaped groove design. It is easy to accumulate dust and hair and wear pulleys.
B. There is no front-to-rear adjustment function. The cement worker's deviation cannot be corrected. The effect of the shower room installation is not good. The glass is susceptible to self-detonation due to the lateral torsion, and the pulley is also easy to wear.
C. All accessories use low-cost aluminum alloy fittings and zinc alloy fittings, and even use plastic as the supporting part, not only lack of strength, but also easy to wear and fragile.
D. There are many burrs on the seams of aluminum materials, which are not smooth and the overall feeling is rough.
5, strip and its sealing
The quality of rubber strips lies in the quality of raw materials and the control of processing technology. At present, the best rubber strip in domestic shower rooms is PVC strips. This strip is suitable for both cold winters and hot summers. Its weather resistance and resistance Aging and other performance exceeds industry standards. The good shower room now has soft edge strips on the edge of the aluminum, which reduces the amount of glass glue and also seals well.
Some of the low-end shower rooms have no good design for the treatment of water barriers at the bottom of the door, and often cause water leakage. In addition, some low-end shower room manufacturers use spring hinges for the hinged doors, and the hinges need to be handled by cutting the tape. As a result, the strip is not a whole from top to bottom, and the water leakage in the hinge area is serious. In short, the quality of the magnetic stripe and sealant used in the low-end shower enclosures is poor. The permeability is not good, and there are many impurities, and they are prone to aging and breaking. The service life is short.
Reminder: For more information, please pay attention to the information on this website , or you can visit our offline experience directly.
More exciting recommendations
Huida bathroom prices
American standard bathroom official website
Faenza bathroom how
Wrigley how to bathroom
Kohler bathroom how
Sanitary Ware Top Ten Brands
Shower Room Shower Room Brand Deli Shower Room Glass Stainless Steel Door Price Cement Aluminum Alloy Glass Glass Door
There are three main types of magnet lamp as following:
Concentrating magnet spotlamp:
Concentrating track lamp is less than the narrow beam Angle range of 20 degrees, can be a place for irradiation or item very conspicuous, but the range is small,light beam light directly, also can become more sharp pair of light spot will become apparent, concentrating track light usually suitable for using in statues, planting flowers, such as art, specific place adorn accent lighting. If used in home space, it is recommended to add soft light lens to modify the light.
Soft light track grille lamp:
Soft light track lamp is 20-40 degrees in the light beam range, compared with the concentrated light track lamp, its light effect will be a little softer, can make the irradiated objects have a strong visual impact, and can not eat the line and texture of the irradiated objects. Soft light track lamp is suitable for wall, painting, photography, general walkway or plane art, etc.
Floodlight magnetic track lamp:
Floodlight type track lamp is more than 50 degrees of wide Angle beam range, belongs to the floodlight source, because the scattering light range is large, can not focus on a single object,but also often together with the background and light source mixed together, more belongs to the atmosphere to create light source, can not guide the visual focus.
magnet lamp,magnetic track lamp,magnet spotlamp
Farwise Technology Co.,Ltd. , https://www.farwiselighting.com