Normal protection of the drive shaft

Source: China Bearing Network Time: 2014-09-03

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The view and warranty of the drive shaft varies depending on the driving method of the different methods.
Regarding the rear-wheel drive car; the drive shaft uses two non-equal speed universal joints. If the clutch is started when the clutch is released, or when the vehicle is suddenly accelerated and decelerated, the bottom of the vehicle will beep; Universal joint connector replacement.
Another way to check is to catch the drive shaft to the left and right under the car; if the change of the viewpoint exceeds 45 degrees; it indicates that the gap of the non-equal joint joint is too large; demand for maintenance.
The drive shaft of the front-wheel drive vehicle uses a constant-speed universal joint; the joint part is sealed with a rubber sleeve; it is necessary for the owner to check the rubber sleeve frequently. Since it is damaged, the gravel will run into the universal joint while traveling; Wear; shorten the life.
It is very simple to see if the rubber sleeve can be broken: if it is extremely viscous oil in the vicinity of the rim and the engine floor; or when the steering wheel is hit, there will be awkward movement; it indicates that the joint is damaged; Replace it.
In addition; the owner should try to prevent the steering wheel from being in place; as this will form the joint joint due to excessive load and shorten the life.

Recommend to friends comments close window

Bearing related knowledge

KOYO bearing common problems and reasons to analyze why the bearing will be damaged?
Diagnosis of the bearing
SKF Swedish bearing front and rear code (2)
Layout characteristics of tapered roller bearings

This article links to http://
Please indicate the bearing network http://

Previous:KOYO imported bearing progressive shaft support rigidity skills Next: NSK bearing packaging and methods

Tool Belts

Tool belt is a piece of equipment used to hold and organize tools for easy access during work. Tool belts are commonly used by construction workers, carpenters, electricians, and other tradespeople who need quick access to their tools while working.

A typical tool belt consists of a belt made of leather or nylon with pockets or pouches attached to it. The pockets or pouches are designed to hold different types of tools, such as hammers, screwdrivers, pliers, and measuring tapes.

There are different types of tool belts available, including leather tool belts, nylon tool belts, and electrician tool belts. Some tool belts also have suspenders or shoulder straps to help distribute the weight of the tools more evenly and reduce strain on the back.

When choosing a tool belt, it is important to consider the type of work you will be doing and the types of tools you will need to carry. You should also consider the size and fit of the tool belt to ensure it is comfortable and does not interfere with your movements while working.

On The Go Tool Pouch

Tool Belts,Electrician Tool Pouch,Tool Pouch,Small Tool Bag

ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.xiangletoolbag.com