Secondly, when sweeping the floor, the sweeping machine should be visually observed for a single sweepable area. When sweeping back and forth, attention should be paid to the sweeping of the sidelines to prevent problems such as blind areas and floor sweepers that the sweeper and side brushes cannot take care of. .
At the same time, for the sake of safety, we should have a reasonable speed when driving a sweeping machine, not too fast or too slow, and the sweeper can only wear the ground with a slope of less than 18 degrees and a turn of less than 15 degrees. In order to protect the sweeper on roads with a lot of water, snow, or potholes, we should clean it manually.
When driving a sweeping machine into the car, we should always pay attention to the battery power situation and supplement it in time to prevent the sweeper from running at a loss. And sweeping machines must not be used on rainy days, and they must not be driven to places with a high concentration of people, and they must not be driven onto highways.
Finally, when using the sweeping machine, it is necessary to always pay attention to whether the dust box is full or not, timely dumping, and after each use is completed, it needs to be cleaned and cleaned in a timely manner, keep the sweeper dry and clean, and timely check each Roller brush and side brush wear conditions, make appropriate adjustments and replacement.
Sweeper is very practical, cheap, work efficiency can replace six cleaners, no power cord and battery and any power source, is a pure mechanical drive maintenance-free cleaning tool, just push the walk to trash can be recycled to the garbage Inside the box, the sweeper will be cleaned and collected at the same time.
Products characters
1.All the products produced by good quality building material factory need get through three strict inspections before packing: Raw material cutting test, Production process inspection, The finished debugging.
2.Providing customized service to apply each customer requirements, we will try our best to achieve 100% customer satisfaction.
Profile
1.High quality aluminum alloy profiles, thickness 1.2-2.0mm
2.Excellent quality thermal break aluminum profiles, thickness 1.4-3.0mm
3.PVC/UPVC material (need to be ordered)
Color
White/ Sliver / Grey / Champagne / Black / Wood grain / special color can be ordered
Glass Type
1.Single toughened glazing:6mm/8mm/10mm/12mm...
2.Double toughened glazing:5+12A+5mm/6+12A+6mm...
3.Laminated glazing:5+0.38PVB+5mm/6+0.76PVB+6mm...
4.Low-E glazing:Green/Blue/Brown/Golden...
5.Other glazing:frosted glass/crystal glass/art glass...
Mesh
1.Aluminum security mesh
2.Stainless steel security mesh
3.Solid iron security mesh
4.Mosquito net(Nylon,Stainless steel,Diamond)
Hardware
1.Germany brand
2.Japanese brand
3.Chinese top brand
Surface treatment
1.Anodizing
2.Powder coating
3.Electrophoresis
4.Fluorocarbon paint
Glass Sliding Door,Tempered Glass Sliding Door,Double Glass Sliding Door,Automatic Glass Sliding Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.pvchighspeeddoor.com