The problem of ball bearings for four-wheel drive

Source: China Bearing Network Time: 2014-05-27

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

.1) Device: If the device is at the wheel axle; the device must be in place and parallel to the left and right; because the outer ring of the bearing is fixed to the chassis; and the inner ring is active; therefore, the wheel must not be pressed into the bearing. End face; between the inner side of the wheel and the side of the bearing, a gap of 0. 2-0. 5mm is left. If the guide wheel with a ball bearing is installed, it is necessary to use a special gasket with a step in the center; The guide wheels use two washers; clamp the inner ring of the bearing; and lock with a nut.
.2) normal protection: in the process of ordinary sports car; should pay attention to protection; if it is found that the bearing has changed the sound of rustling or is not very smooth; it is necessary to remove the bearing or guide wheel to remove; in addition to the sports car; Bearings add lubricant; to further reduce friction.

Recommend to friends comments close window

Bearing related knowledge

High quality tapered roller bearing 32004X
Hydraulic bearing fan analysis
TORRINGTON company bearing make up code (1)
What are the physical quantities of bearing occupations that use eight categories to characterize bearing oscillations?

This article links to http://
Please indicate the bearing network http://

Previous: "The key to the application of rolling mill SKF bearings" Next edition: Ball bearing processing transaction unit consumption specification

Air conditioner parts

Air Conditioner Parts,Air Conditioner Parts And Accessories,Air Conditioning Parts And Supplies Near Me,Air Conditioner Parts Cost

Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com