The zirconia corundum abrasive product is a member of the high-tech series of VSM belts and has a special field of application. Has a good grinding effect on all kinds of steel, cast iron, non-ferrous metals (aluminum, brass, bronze). In combination with special coating techniques, most VSM belts in the zirconium corundum series are suitable not only for manual grinding but also for machine grinding.
The VSM belts of the zirconia corundum series have very good self-sharpening properties. This greatly improves the grinding performance when grinding the workpiece, which also indirectly increases the service life of the belt. This has made great advantages in terms of cost performance. At the same time, the VSM belts of the zirconium corundum series are also higher than the similar products in improving the surface finish of objects.
In addition, VSM belts with super-coating are particularly suitable for stainless steels and high temperature tempered steels. This type of super-coated VSM belt increases the grinding strength of the workpiece, greatly reduces the grinding temperature on the workpiece surface, and greatly reduces the chance of adverse effects on the workpiece.
In granite mines, only injection-molded and rubber-injected diamond beaded ropes with or without springs can be used. Diamond beads can be sintered or electroplated, but sintered is mainly used. Generally, there are 32-40 diamond beads per meter. It is suitable for secondary cutting at the initial stage of mining and any angle, but not for block shaping. The largest cutting side reaches 20-500㎡, rarely 300-450㎡, the average production capacity is 1.5㎡/hour-8㎡/hour, the life of diamond beaded rope is 2.5㎡/meter-12㎡/meter on average, diamond The linear speed of the beaded rope is 16-26m/s.
Diamond Wire Saw For Granite,Granite Cutting Saw,Wire Saw For Granite Cutting,Wire Saw For Granite Quarry
Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com