Device for oscillating motor bearings

Source: Bearing network time: 2017-12-20

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The imported bearings replace the new time of the oscillating motor; the effect is different; and it is necessary to use the same bearing as the original type; and the role embodied in this aspect has a better meaning; This aspect shows a better effect. Firstly, the condition of the imported bearing is analyzed from the following conditions.
When the oscillating motor is replaced with a new one; it is necessary to use the same bearing as the original type.
1) The bearing is washed with kerosene; press in the bearing seat; fill the shell of the outer ring of the bearing with Shell No. 3 lithium base grease to two-thirds full; apply uniform with the net hand; install the bearing gland; The bolts of the bolt-proof rubber are pressed against the bearing gland.
2) The bearing is a detachable cylindrical roller bearing in the front and back; the bearing should be placed on the rotating shaft and in place.
3) Mount the bearing housing on the casing; if there is a grease oil filling hole; it is necessary to align the bearing. Press the fastening bolt with the anti-loose rubber to press the bearing seat.
4) The painful block in the watch is mounted on the rotating shaft and is in place; if there is an axis key, the axis key should be installed in the keyway and then the external pain block should be installed; the shaft retaining ring is mounted on the rotating shaft.
5) Tightly fix the bite block fastening bolt; change the adjustable bite block; make it reach the position of the viewpoint before the unloading and tighten the fastening bolt. After the above assembly is completed; the shaft should have a certain axial movement,
6) Shield on both ends of the upper oscillating motor; fasten with screws.
The role of imported bearings in the way of oscillating motors and other aspects of the oscillating motor is a necessary change; and the way of thinking from a different point of view also has a certain change; gradually, the situation of various devices has also Must understand.

Recommend to friends comments close window

Bearing related knowledge

Characteristics of deep groove ball bearings and smooth method of using roller NSK bearing
INA angle touch bearing bearing use - metal exercise and processing

This article links to http://
Please indicate China Bearing Network http://

Previous:How to clear the motor shaft next:The rolling bearing heating method and the key of the device

Amusement Lighting

Amusement Lighting,Waterproof Led Amuserment Pixel Point Light,Led Pixel Amusement Lighting,Full Color Light Led

Shen zhen SH LED Technology Co.,Ltd , https://www.pixellightsolutions.com