Main machine
I Dececription
1. One set of main machine can only produce one mesh size.
2. One set of main machine can make several wire diameters.
3. You can weave two or three net with the same machine.Â
4. Adopt the principle of clockwise and counterclockwise twisting; no need to make iron wire    spring form to increase productivity.
II Technical parameter
Wire dia. |
Mesh size |
Mesh width |
Speed |
Motor |
Weight |
Dimension |
0.55mm-1.1mm |
1" |
3.3M |
90-100m/h |
10-13.5KW |
3T |
6*1.3*1.6M |
0.7-1.6mm |
2" |
3.3M |
135-150m/h |
|||
0.7-1.8mm |
3" |
3.3M |
140-160m/h |
III Advantage
1, Spools feeding raw material, 45-50meters/ minute, high production.
2, Weave several nets with the same machine.
3, Grid counter to calculate weaving length and stop machine automatically.
4, Clutch brake and spot start, fewer workers required, easy operation.
5, Centralized lubrication, easy maintenance.
6, Automatically winding up rolls (cardboard in center).
IIIÂ Working process of whole production line
V Application
1. used in petroleum, construction, farming, chemical industry, and pipes parcel wire mesh.
2. used for fencing, residential and landscape protection, etc.
3. used to make stone wire mesh cages to protect seawall, hillsides, road and bridge, reservoirs
and other civil engineering, etc.
VI Loading
   
VII Certificate & Contacting
  
Â
Our Tungsten Carbide Tipped Cutters(TCT hole saws) are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer. Say goodbye to burnt out, smoking holesaws. Try a T.C.T. you'll love it.
Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys.
The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.
T.C.T. cutters are the standard for electrical construction, transit work and general metal fabrication. The spring on the pilot bit ejects the cut slug.
With normal care, Tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use
Tct Hole Saw,Tct Cutting Disc,Carbide Circular Saw Blade,Tct Hole Saw Cutter
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com