Laminate flooring and solid wood flooring in the paving process are basically the same. At present, the more common method in the market is suspended paving.
1, grassroots processing
The first step in paving the floor is grassroots processing. The grassroots treatment is mainly focused on the five major problems of “sand, tide, concave, convex, and cracked†on the ground, and the ground is repaired to form a new grassroots layer so as to prevent the arching of the floor caused by the emptying and cracking of the original grassroots.
2, leveling the ground
After doing a good job at the grassroots level, we need to level the ground. If the ground is uneven, not only will there be gaps in the baseboard, but the overall floor will also be uneven and there will be abnormal sounds, which will also seriously affect the quality of the floor.
Self-leveling and leveling construction is one of the most advanced ground construction technologies on the market. It can ensure that the difference between the height of every two square meters of the original ground does not exceed 3 mm. During construction, workers mix a variety of materials with water into a liquid substance. After pouring it into the ground, the liquid substance can flow according to the unevenness of the ground, automatically level the ground, and quickly dry and solidify. The ground will form a smooth, flat, seamless new base.
Self-leveling can make the floor more flat and ensure the floor's quiet effect. At the same time, it will make the ground stronger and avoid arching under the floor. In addition, it also ensures that there is no air barrier between the floor and the floor, which increases the thermal conductivity of the floor. If you do a general cement leveling, be sure to allow time for the cement to fully dry. Can not be installed when there is moisture on the ground. There is a simple method to measure moisture. Cover it with 60cm square plastic film on the ground and seal it around. After 24 hours, observe the film has no moisture. If there is moisture in the film, it cannot be installed. In addition, if the ground The difference in height between square meters is more than 5mm and it cannot be installed.
Nature Flooring Del Floor Cement
Manufactured from themoplastic EPDM and Brass, these clever toggle fasteners have numerous applications. Most often used to secure hardware and other objects to thin steel, aluminium, plywood or fibreglass surfaces where there is no access to the cavity.
With a captive Brass Nut, the toggle expands within the cavity as it is tightened. The rubber-like compound provides a seal against water and salt penetration while insulating against vibration.
Available in a range of sizes to suit many applications onboard your vessel.
Sold individually, with automatic discounts for purchases over 1000 units.
Note that the nuts have metric threads and the bolt is not supplied.
M3,M4,M5,M6,M8,M10 & M12 also available
Rubber Nut,Rubber Nutsert,Expanding Rubber Nut,Rubber Anchor Nut
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com