2. Precautions (1) If there is no taper or bowl-shaped grinding head, a cylindrical grinding wheel can be used, but the shank should be ground at an angle when it is ground or clamped. Grinding heads and shanks should not be too small to avoid rigidity.
(2) The chuck to be ground can only be fastened by bolts on the spindle flange for processing. It is strictly forbidden to clamp the chuck to be repaired with the chuck to prevent the chuck from flying out.
(3) Because the centrifugal force generated by the high-speed rotation causes the claws to automatically tighten outward, it is not necessary to fix the claws during grinding.
(4) It is forbidden to stand before and after the chuck at work, and a protective cover or protective net should be installed to prevent the grinding wheel from flying out and hurting people.
(5) Try to choose high speed when the equipment allows, generally it is appropriate to produce obvious sparks. Reverse grinding is prohibited to prevent the grinding head or chuck from loosening and injuring people.
(6) If the lathe has a taper, the claws will also be tapered, and the tool can be fed midway to compensate for the taper.
3. Advantages (1) Fast, generally can be ground in about 15 minutes.
(2) It is simple and convenient to manufacture, and the grinding head can be used only after turning in the direction and then tightening, and the service life is long and the cost is low.
(3) The amount of grinding is very small, generally about 0.1 mm each time.
(4) Regardless of the hardness of the jaws, even the claws with the solder joints can be smoothed and smoothed, and the surface roughness Ra can reach 0.8 μm.
(5) The amount of runout of the claws after grinding can generally meet the requirements, and the coaxiality of some chucks can reach 0.02mm when clamping the workpiece.
(6) This method is suitable for most horizontal lathes and some CNC lathes, which can significantly improve the work efficiency and processing quality of the lathe. A lathe with similar specifications can share a single tool.
(7) Extends the life of the three-jaw self-centering chuck and reduces the consumption.
4. Inadequacies (1) Only the long clamping surface of the positive jaw and its end face can be ground, and other parts cannot be ground.
(2) Small chucks (<160mm) and hydraulic chucks and pneumatic chucks cannot be ground using this method.
(3) The grinding effect of some lathes with low speed and some old chucks is generally or not ideal.
For more articles, please refer to "Mechanical Workers" Cold Processing 2007 No. 1
Previous page
Cangnan Younglite Electrical Co., Ltd. is located in Ningbo City, the most important seaport city in China. We are only 40 Kilometers far from Ningbo Airport. Near the express way, the transportation is very convenient.We are specialized in manufacturing and exporting LED Flashlight, headlamp, camping lantern and so on.We have outstanding management, strong production capability and advanced technology ability to design and develop many new items which have good quality control and testing at every stage of the production process. We can ensure that each product is eco-friendly and will provide long life and high performance service. Currently, our products are very popular in the USA, Europe, South Asia, the Middle East and Hong Kong."Quality first, delivery on time, reputation as life" is our premier principle. Let us make better quality products to you-----our valued customers.
We are the vendor of ALDI, WalMart and other supermarket, also we supplier the products to professional tool wholesaler like SBI, Carl Kammerling etc.
Plastic Headlamp,Plastic Cob Led Headlamp,Led Plastic Headlamp,Plastic Headlight Lens Headlamp
Cangnan Younglite Electrical Co., Ltd. , https://www.younglitetec.com