When repairing the inlet and exhaust valves of air compressors, it is usually used to manually grind the valve port, which has low efficiency and poor effect. If on the drill press (as shown), use the drill chuck 1 to clamp the eccentric flange shaft 2 (The lower shaft is 3mm away from the center of the upper shaft), and then the rubber mat 3 with thick 20mm (the upper and lower ends are sawn into a mesh shape), placed on the lower shaft of the eccentric flange shaft 2, and pressed to the valve
Pressure sensor usually consists of a pressure sensor and a signal processing unit for measuring the pressure of liquids and gases. According to different test pressure types, pressure sensors can be divided into gauge pressure sensors, differential pressure sensors and absolute pressure sensors. According to the working principle, it can be divided into Ceramic Pressure Sensor, diffusion silicon pressure sensor, piezoresistive pressure sensor, sapphire pressure sensor and so on.
Pressure Sensor,Miniature Pressure Transducer,Pressure Transducer,Hydraulic Pressure Transducer,pressure transmitter
Xi'an Gavin Electronic Technology Co., Ltd , https://www.gamicos-meas.com