Mei An Chunmei: pay attention to the details to choose genuine solid wood furniture

All solid wood furniture is solid wood, such as teak, cherry, red eucalyptus, etc., the price is relatively high. The veneer furniture is mainly made of wood-based panels. It only has a solid wood veneer on the outside, which looks just like pure solid wood furniture. How do consumers distinguish between these two types of furniture? First, Mei An Chunmei teaches you to observe wood grain. If the wood grain on the surface of a cabinet door does not correspond to the wood grain on the back of the door, it is veneer furniture. Secondly, the color of the newly bought furniture is identified. The taste of solid wood furniture is generally not too strong. Moreover, by tapping the wooden board to distinguish, the sound is solid wood.



● Judging whether the furniture is really made of solid wood, mainly watching the door panel and side panels. Tips: knots, wood grain and cross section. Crust: Look at the location of the scared side, and find the corresponding pattern on the other side.
Wood grain: the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the corresponding is very good, the pure solid wood section: the color of the section is deeper than the panel, and It can be seen that it is made of whole piece of wood. ● According to the wood grain, it is made of tree species, which directly affects the price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine, in addition to environmental protection, performance is much worse than the artificial board.
● Judging the origin of solid wood manufacturers Pay special attention to the origin of solid wood furniture and wood manufacturers. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood furniture produced in the south reaches the north, it will be susceptible to cracking and deformation due to the climate, so it is necessary to see the origin of the trees when purchasing.
● Observe the wood for defects. Several major defects of solid wood: cracking, crusting, insect eyes, mildew, and carefully check the details when purchasing.
Cracking: Naturally can't buy.
Scarred: If there is a crusted front, the same position on the back also has this crusting. This crusade is basically a dead knot, and it will fall off after a long time. Therefore, furniture with such defects cannot be bought.
Insect eye: Although many furniture brands claim to be dried and degreased, you think that China is so big, there are so many furniture factories, and the credibility is compromised.
Mildew: It is the fact that the wood is green and has water marks. Although the salesperson will tell you that it has dried up, no problem. But the mildewed wood, its performance is not the same as before. ● Look at the connection of various parts of the furniture

Good solid wood furniture is connected by gutters. In places where the local load is relatively large, it is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, then the furniture is not strong enough. Judging the firmness of the furniture, Mei'an Pure Beauty teaches you to judge by shaking the furniture and feeling its stability.




Source: GO Jiaju Furniture Network

Hotel Products

Carving Station,Chafing Dish,Heat Lamp,2-Lights Marble Carving Stations

Shaoxing Biaoyi Hardware Products Co., Ltd. , https://www.byeob.com