Recently, air quality has become a hot spot for everyone. The high PM2.5 index gives people a deep understanding of the importance of fresh air to human health. In fact, dust smog is also generated in the home decoration. The indoor dust is diffused, which not only harms the health of workers and users, but also increases the cleaning burden. When the dust is serious, it also brings many hidden dangers to the decoration project. Deliberately controlling the amount of dust during the home improvement process not only contributes to maintaining a clean environment, but is also an important step in measuring the quality of the decoration.
â– Protection recommendations
Brush the ground and block the ground particles
Nowadays, the ground and wall of some new houses are not in place due to the painting work, which is easy to cause subsequent hollowing, cracking and sanding, which is the source of dust pollution. For example, if there is a running sand phenomenon on the concrete floor, the ground is loose and it is difficult to clean it, and a large amount of floating dust will appear. This not only causes pollution to the environment, but also dust particles on the cement floor will adhere to the work surface during the subsequent construction process, thereby reducing the quality of the putty and painting.
In response, some home improvement companies have introduced the “Additional Solids†program. The ground solid is the ground curing agent, which is used for curing the cement floor at the beginning of the decoration. The ground solid can penetrate the cement floor and block the loose particles on the ground, which is convenient for the close combination of the decorative materials and the ground, effectively preventing the hollowing phenomenon of the floor tiles and facilitating the cleaning of the ground.
It is understood that some home improvement companies "Additional Solid" is an essential program, and some companies choose project projects. The price of a barrel of ground curing agent is about 100 yuan - 200 yuan, you can paint about 100 square meters. Consumers can choose according to the quotes of the home improvement company.
Wet sawdust for cleaning
Water spray humidification is a good way to clean dust during the decoration process. It should be noted that not all aspects are suitable for water spray cleaning. For example, in the woodworking program, the moisture should not be too much, and it should not be directly sprayed on the wood. Otherwise, the wood will be wetted or even deformed. In the putty polishing process, the excessively wet indoor environment is not conducive to the drying of the wall. The dust quickly falls off and airs dry.
Venting the room is a must for dust removal before staying in a new home. In addition to dusting with a vacuum cleaner and a wet cloth, you can clean the dust and put some wet wood chips on the ground. Since the wood chips have an adsorption effect, the water will not be dusted when the water is sprayed, so that the dust is cleaned up.
In daily life, the most common dust accumulation is the space and location under the bed, window sill, under the table, chandelier, etc. in the bedroom. When designing the space, try to avoid the dead angle position. The ceiling in the home should not be designed too complicated. Try to choose the chandelier with the height that can be stretched. The usual cleaning will save you more trouble.
Putty polishing on the spot wearing a mask
Usually the wall part of the home decoration, the decoration workers first use plaster to level, and then putty powder. In order to partially flatten the wall, after the whole putty powder is dried, it needs to be manually polished with fine sandpaper.
In this process, a large amount of material falling off, which is the dust we see, is also the most prone to dust pollution during the decoration process. These dusts enter the body through the respiratory tract, and long-term inhalation can cause damage to the body.
Protective measures: During this period, the necessary protective measures must be taken regardless of the workers or users. For example, dust isolation masks and other tools. These fine dusts tend to adhere to places that are not well taken after renovation, such as doors and windows, and can be taken care of by a vacuum cleaner.
Tip: In the actual construction period of the decoration, the putty powder grinding does not need to be too long. It is understood that a room of about 60 square meters, it takes about one day to polish the putty, but it takes a little time to scrape the putty again. Partial decoration users can know the progress and duration of the project in advance, protect the furniture to be protected, use protective masks, minimize the indoor stay time, and avoid the impact of dust pollution.
Wood dust used dustless cutter
The dust generated by the woodworking work basically comes from the drilling of the building wall, the cutting of the household ceiling plasterboard, and the cutting of the wood board. Relatively speaking, the board cuts more dust. Since the home-decorated panels are basically all integrated boards, the raw materials of these sheets are pulverized by a machine and then sub-molded by a rubber, so that powder is likely to appear during the cutting process.
In addition, dust is also highly likely to occur during the laying of the floor. The fine powder flying during the floor covering process is difficult to clean completely, and the residual powder may also pose a hidden danger to the health of consumers.
Protective measures: Some companies in the industry have now used dust-free cutters to avoid dust generation through precise cutting. The dust collection technology built into the cutter can also absorb a very small amount of dust generated, prevent the dust from escaping and eliminate the dust to the utmost extent. When consumers buy the floor, the quality of the floor covering project should also be considered.
Tip: For the wood chips generated by the woodworker during the cutting process, it is necessary to wear protective glasses, special masks and window ventilation. Woodworking cutting is generally not allowed to be done outdoors. If consumers are particularly concerned about dust pollution during the decoration process, they can purchase custom furniture products and install them directly indoors.
Bricklayer dust to minimize the pollution area
The bricklayer's dust comes from the cutting of sand cement, wall tiles and floor tiles. It is understood that the basic materials of wall tiles and floor tiles are clay and rock, which are formed by pressing, smashing, firing, grinding or glazing. In the actual placement process, if the size is not matched, it is necessary to cut on site, and it is inevitable that a large amount of dust is generated in the cross section. In the process of installing cabinets with marble countertops and paving wall tiles, bricklayer dust pollution is the most serious.
Protective measures: The only solution to this situation is that the designer designs the paving map and installs it directly on the site after the factory is completely cut, thus avoiding secondary pollution on the construction site. Secondly, during the construction process, the cutting works should be arranged in one room as much as possible, and the windows should be diligently ventilated to minimize the pollution area.
Tip: During the decoration process, the fine dust is very easy to bring bacteria into the body. During the decoration, it should be cleaned and cleaned in a timely manner. Wet cleaning should be carried out in air-conditioned rooms to avoid contamination of the bacteria.
Bathroom Shower room from Castel can be divided into sliding shower room,shower room door and shower room screen. 6mm/8mm tempered glass and high quality aluminum frame make sure the high quality and safety. It can be widely used in home bathroom or some projects.
- We choose the tempered glass with national 3C certification and European standard. These hiigh purity and good permeability tempered glass have 3-5 times bendign strength and 5-10 times impact strength comparde with normal glass,which ensure the safety in use.
- High quality aluminumprofiles which have good corrosion resistance and toughness features.
- Handles with chrome plating pass the 24 hours acetic acid salt spray test.
Shower Room,Bathroom Shower,Bathroom Shower Enclosure,Tempered Glass Shower Room
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com