4.6kv Static High Voltage Generator for Ion Gun

4.6KV Static High Voltage Generator For Ion Gun 
 

Descripion:

Ionizing air gun is a handheld type anti-static device, its feature is strong wind, good anti-static effect, usually used in remove the dusty which is caused by static. It should be equipped with compressed air and high voltage power supply.
Widely use in cutting, circle and laminating of plastic spraying, electronic industry, LED photoelectric, printing, packaging, plastic film,ect. 

Working principle:

Ionizing air gun can produce plenty of positive & negative ions, which can neutralize the products static.. When the products surface with negative charge, it will attract positive ion in air flow; when the products surface with positive charge, it will attract negative ion from air flow, so that static on products surface will be neutralized, and then eliminate static electricity.


Features:

1. Neutralize static electricity quickly
2. Good dedusting effect 
3. Ionizing air gun has good ground protection
4. Air gun used with generator (one pcs generator can work with two guns)
5. Two kinds: black plastic head and white metal head (Default shipping: white metal head )
6. This air gun suitable for that irregularity or product with a crack which is difficult to anti-static or anti dust.
7. 7.Wire of ion gun is 2.9 meter

Contact us:

 

PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.

 

Description:

PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.

PP Plastic is widely used in industry and is one of the most common polymer materials.

Australian COINS are also made of polypropylene.

Polypropylene bonding:

 K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.

 

K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.

 

K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.

 

Advantages:

1. Low density;

2. Heat resistance ;

3. Non deformation;

4. High stiffness;

5. High surface strength;

6. Good chemical stability;

7. Nontoxic and safe.

 

Disadvantage:

The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.

Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.

Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.

Poor printing performance.

 

Application:

1,Valve part, drinking water and sewage water pipe,

2,Sealing element, spraying carrier,

3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,

4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,

5,Electroplating process, toy part

 

Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.

 

Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.

The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.

 

Color: white and black, other colors can be customized

Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements

 

Storage methods:

Keep in tight, cool and dry place to ensure good ventilation

 

Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.

PP Plastic Sheet

PP Plastic Sheet,Polypropylene Plastic Sheet,High Hardness PP Sheet,Non Deformation PP Sheet

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com