Xiangtan Superstar Casters Co., Ltd, established in 1991,export our goods to all the world,such as USA,BRAZIL,MEXICO,NORWAY,JAPAN,INDONESIA,SAUDI ARABIA,ect.
We have fruitful experience to do international business!
Caster Features:
1.Wheel material: Cast iron (Semi-Steel) wheel
2. Wheel size: 6" ×2"Â
3.Swivel-full double ball bearing
4. Finish-bright Zinc plating
5. Top plate and yoke base-it uses 5.6mm steel plate
6. Axle-1/2" diameter bolt
7. Brake
Package:
250pcs/Crate
24pcs crates/20' container
Payment:
By T/T. 30% deposit, the balance before shipment.
Delivery time:
30 days after receiving the deposit.
Our Services
It's honor to do business relatiionship with you!
Since 1991,we build our factory,and have richful experence about export our goods.
We will do our best to do:
1.quote the reasonable price!
2.offer our best quality products!
3.offer our best services!
For more goods,Please check our website: www.superstarcasters.com
Â
Thank you and best regards,
Lela Wang
There are two principal neodymium magnet manufacturing methods:
ï‚·Classical powder metallurgy or sintered magnet process
ï‚·Rapid solidification or bonded magnet process
Bonded NdFeB Magnet is made by evenly mixing neodymium iron boron powder with resin, plastics and low melting point metal and so oncaking agents, then made the boron permanent magnet of compound neodymium iron by methods such as compressing, pushing or injecting shaping. The products take shape once, do not need processing again and can be made into various complicated forms derectly. All directions of the Bonded Ndfeb Magnet are magnetic, and can be processed into compression moulds and injetion moulds.
Bonded Ndfeb Magnets are prepared by melt spinning a thin ribbon of the NdFeB alloy. The ribbon contains randomly oriented Nd2Fe14B nano-scale grains. This ribbon is then pulverized into particles, mixed with a polymer, and either compression- or injection-molded into bonded magnets. Bonded magnets offer less flux intensity than sintered magnets, but can be net-shape formed into intricately shaped parts, as is typical with Halbach arrays or arcs, trapezoids and other shapes and assemblies (e.g. Pot Magnets, Separator Grids, etc.). There are approximately 5,500 tons of Neo bonded magnets produced each year. In addition, it is possible to hot-press the melt spun nanocrystalline particles into fully dense isotropic magnets, and then upset-forge or back-extrude these into high-energy anisotropic magnets.
Bonded magnets can be made from either hard ferrite materials or rare earth magnetic powder. They are manufactured using both injection molding and compression bonding techniques which are fully automated and are particularly suitable for high volume production.
Bonded neo powder is incorporated into numerous end market applications that utilize bonded neo magnets. These products are primarily motors and sensors used in a range of products, including computer and office equipment (e.g., hard disk drives and optical disk drive motors and fax, copier and printer stepper motors), consumer electronics (e.g., personal video recorders and mp3 music players), automotive and industrial applications (e.g., instrument panel motors, seat motors andair bag sensors) and home ventilation systems (e.g., ceiling fans).
Application of Bonded Neodymium magnets:
•Magnetic separators
•Microphone assemblies
•Servo motors
•DC motors (automotive starters) and other motors
•Meters
•Odometer
•Sensors
Bonded Ndfeb Magnet
Bonded Ndfeb Magnet,Permanent Bonded Ndfeb Magnet,Compression Bonded Ndfeb Magnets,Bonded Ndfeb Magnets
Jinyu Magnet (Ningbo) Co., Ltd. , http://www.magnetbonwin.com