In fact, some regrets can be foreseen and avoided in advance. As long as you listen to the opinions of those with renovation experience, your renovation will save you a lot of trouble. Here is a shot for those friends who are preparing for the decoration war.
Fault one: The size of the inner door is not left
Old-fashioned houses are generally equipped with anti-theft and two-door entrances. When they are renovated, it is easy to cause the joints between the floor and the door to be insufficient, and no thicker floor mats can be placed.
Designer crack
Before the renovation, when measuring the dimensions of the door, be sure to fully consider the thickness of the floor, floor tiles, floor mats, etc., leaving the remaining joints in advance. If there is a similar problem afterwards, you can change the thin floor mat, or dig the floor according to the size of the floor mat, and put the floor mat after sealing.
Fault II: Reserved socket is not enough
Today, more and more types of household appliances, when the decoration needed more than a few sockets, and now it is not enough, and the dark line of decoration can not be changed. Moreover, when designing the TV background wall, there is no wall outlet TV, audio, and other power outlets, and the household can only use the clear line, which not only affects the appearance but also brings inconvenience to cleaning.
Designer crack
When refurbishing, take into account the number of electrical appliances that need to be purchased in the future as many as possible to prevent the sockets from keeping up with the development of electrical appliances. If you are using an LCD TV at home, it is best to leave the location of the wall outlet. If you don't have it, you can wrap some artificial flowers on the open line and you can also decorate it.
Fault three: ceiling keel can not afford the pendant lamp
When playing ceiling keel, did not consider the future installation of crystal lamps and other heavier lighting, and it is very simple to play, and finally the lights when found that the ceiling does not bear the weight of the light.
Designer crack
Either change the lighting that the ceiling keel can withstand, otherwise a resin lamp similar to a crystal lamp will be installed. If you must install the crystal lamp, you can dig a little bit from the ceiling, mark the original roof with expansion bolts, hit the hook, and finally hang the lamps.
Fault 4: Not enough storage space
It's difficult to arrange enough storage space in the kitchenette, but the kitchen is the most miscellaneous items. What should be done if those pots and pans with headaches have nowhere to hide? Stacking them horizontally on the cooktop is neither convenient nor easy to use.
Designer crack
The kitchen must be mainly convenient and practical, and the small kitchen must have a good space. If the floor cabinets and wall cabinets are not enough, you can buy some appropriate metal kitchen shelves or brackets installed on the wall, microwave ovens, rice cookers and other storage on the wall, shelves with hooks can also be hung on a variety of spoons, knives And other debris.
Fault 5: There is no space for the fridge
When decorating the kitchen, the size of the refrigerator was not taken into consideration, leaving a block where it wasn't.
Designer crack
When the cabinet designer comes to the door to measure the size, he must provide him with the exact dimensions of the various appliances in the kitchen, and according to his own living habits, fix the position where they are placed, and then design the size of the cabinet. If the kitchen is not far from the restaurant, the fridge can be placed in the dining room; if it is too far away, you can only buy a refrigerator of a suitable size.
Fault six: water heater exposed
Larger water heaters, if exposed in the decoration, not only take up space, its intricate pipelines also affect the appearance, but also take care of.
Designer crack
It is possible to customize a cabinet with louvered doors to wrap the water heater so that it is both beautiful and dustproof. Louvre door cabinet can be customized with the same style as the cabinet, the overall effect is better.
Fault seven: Wardrobe space only focus on the eyes
For two-bedroom units, most people only make large wardrobes in two bedrooms and do not try to “crowd†separate spaces for utility rooms. In the future, with the increase in clothing, these two cupboards are definitely not enough. In the summer, they must desperately squeeze the cupboards.
Designer crack
Small-sized units must fully consider the future storage and storage functions in the design stage. It is very popular nowadays to design the whole cloakroom or storage room in a limited space to meet future needs.
Fault eight: The top light is not designed dual control
The ceiling light switch of the bedroom is only located at the entrance door, but does not set up a pair of dual-control switch on the bedside again. In this way, after watching television or books at night in bed, he had to get out of bed and turn off the lights and go to bed again. In winter, it was even more annoying. He shivered when he was cold and he turned up and turned off the lights.
Designer crack
If you have such special needs, you can communicate with the workers' masters during the renovation of the electrician's stage, and you can take a dual-control circuit. Without a dual-control circuit, it is also possible to purchase remote-controlled lighting fixtures in lighting companies.
Fault 9: Floor drain is insufficient
This problem generally has two situations: First, the floor drain is not the lowest point, and second, the amount of floor drain is not enough. In this way, not only is it easy to cause the trouble of “swimming with water†when bathing, even the washing machine may not be usable.
Designer crack
For the lowest point problem, we must remember to check the drainage when accepting and decorating the bathroom. Otherwise, it will not only affect the bathing mood, but also cause serious water leakage to the neighbors downstairs. For the trouble that the amount of floor drain is not enough to use the washing machine, it is OK to install a floor drain for both laundry and drain. Floor drains are usually installed near the sink, shower area, washing machine and toilet.
Fault 10: Shower room waterproof layer is highly unreasonable
When some homes are decorated, it is necessary to waterproof the shower area to make it waterproof. Some families neglected the issue of waterproofing and did not do it sufficiently high enough to leave hidden water seepage.
The water in the bathroom should not be ignored. It must be done in place, but generally it is enough to be 30 centimeters high. Too high, but will cause empty walls, ceramic tiles and other ills. Moreover, the tiles themselves also have a certain waterproof effect, so it is not necessary to overcorrect.
Renovation points Decoration Design space Receptacle TV Decoration Appliances Decoration Kitchen Home decorating TV background wall Home decorating Wall decoration style Cabinet cupboard Door cupboard Doors Home cabinets Cabinets Shutters Doors Kitchen cabinets Doors Floor tiles Wardrobes Door mats Toilet tiles Toilet doors Small apartment TV Background wall Bathroom door size Bathroom size Small apartment wall Bathroom ceiling Bathroom toilet Bathroom bathroom Bathroom floor bathroom Leakage bedroom TV background wall Bedroom lamp Bedroom Wardrobe Tile Wall Restaurant Ceiling Background wall tile Kitchen tile Small bedroom Cloakroom Floor tile Ceramic tile Bedroom lamp
Sectional Door Accessories: motor 220V-380V, control box, spring break device, cable break device , aluminum alloy rope pulley, enhanced shaft bracket, air bag system, duplex enhanced guide wheel bracket.
Detail introduction for above main accessories
1.Motor and controller:
The garage door operator is designed for residential overhead sectional and tilt doors.
The operator memorizes the limit positions and unique braking system that slows the unit down at the end of its travel.
Rolling code remote control with max. 20 pcs hand transmitters.
The operator is equipped with a manual release lever which allows manual operation of the door in case of power failure.
The controller has a security LOCK function which prevents operation of the door from transmitter.
2.spring break device:
Sectional doors are hinged and they bend in the tracks as the door opens and closes. Many of these doors are counterbalanced with extension springs, also designated "stretch springs," and they have seven characteristics. The length is the measurement of all the coils pressed together. This, along with the inside diameter of the coils and wire size - the thickness of the wire from which the springs are made - determine the stretch, the distance the spring is extended - normally half the door height, and pull, the force the spring pulls when stretched its normal length. The type of ends determine how the ends of the spring are mounted. The initial tension is the percentage of pull needed to separate the coils. This is determined by the pitch with which the springs are wound. On sectional garage door springs this is normally 15 percent. For example a 100 pound pull spring requires 15 pounds of weight to separate the coils; when a door is open the two springs will support 15 pounds of door weight without any stretch.
Most extension springs are made of oil tempered wire. These are normally coated or painted. Some springs are made of galvanized wire.
3.able break device:
cable break device ,door hardware
adjustable bottom bracket .
the raw material hot plate
zinc plated
safety device
adjustable bottom bracket
the raw material hot plate
zinc plating
spring safety device ,2" and 3" safety device
once the cable is broken ,this devoice can keep the hurt away from the door falling
4.aluminum alloy rope pulley
Equipment: CNC stamping/punching machine, CNC bending machine, CNC cutting
machine, 5~250 tons punching machines, welding machine, polish machines...
Processed material: stainless steel: copper, carbon steel
Surface treatment: Hot galvanized, polishing
Making process:Stamping, deep drawing,bending, punching, laser cutting,threading,
welding, tapping, riveting, grinding
5.air bag system
It is a safety device. When the door is down to hit something, it will up automatically.
Operation pressure:<3mbar
Battery:CR2032*2
Battery lifetime>1 year
Emission frequency: 315MHZ
Emission power:<10mW
Receiver power source:12V
6.duplex enhanced guide wheel bracket
Determining the right type of sectional door roller for your garage door tracks can be a little confusing, especially when you do not know what you need to look for in a garage door roller. To simplify things, there are two primary things you need to be aware of. First are the actual dimensions of the roller, and second is purpose that you will be using the door for. You can read below about measuring your roller and choosing the right quality of material for your door.
Other Door Accessories,Electronic Door Accessories,Automatic Door Accessories,High Speed Door Radar Detector
Shenzhen Hongfa Automatic Door Co., Ltd. , http://www.hffreezerdoor.com