Hot Sell and Good Quality for Precision Machines Coupling Swl Series

• Model NO.: SWL
• Structure: Oldham
• Material: Steel
• Item: Coupling
• Length: According to Customer′s Requirement
• Product Name: Coupling
• Precision: C7, C5, C3
• Thread Direction: Left or Right Thread
• Trademark: DRE
• Origin: Dalian

• Connection: Flange
• Flexible or Rigid: Flexible
• Standard: Standard
• Main Material: Chrome Steel
• Model Number: Sfu1002
• Place of Origin: Fujian, China (Mainland)
• Hardness(HRC): 58-62
• Pitch: 4, 5, 10, 12, 20, 40, 50, 60 mm
• Specification: SGS
• HS Code: 2701110090

Introduction

  Coupling is a mechanism device, connecting transmission between two shafts and transmitting safety torque.

  Coupling divided into "Flexible type" and "Rigidity type".

  To apply flexible couplings timing in case of power transmission, two shafts are not easy to set in alignment, or to simplify two shafts installation. It contains shock buffer to absorb parallelism, deflection, axial displacement, deviation improvement, and improvement of traditional transmission power, so few deviation would not cause any unusual situation on bearing. It is widely applied to current markets.

  Rigidity coupling is a unit causing non-eccentric, non-deflection, and make two connected shafts fixed in one unit. Users must do the best to have motor running and axis of load in alignment due to high requirement of concentricity, also means of axis has to be calibrated strictly; otherwise, the rotating shaft would be broken caused by mechanism fatigue, also the bearing would be thermal abrasion due to eccentric load, those were brought by continuous vibration of the axis during long term running of the motor. The advantage of rigidity couplings is to transmit transmission torque precisely.

SWL Coupling Show


 
DRE Customer Reference




Our Service

Winthin 24 hours reply
Professional exporting handling
Professional bearings knowledge
Custom service
OEM service
Stock service
Kinds of payment terms
Technical Supports
Sample available
Warranty:12months
Any shipping method


If you have any question about our products and technical details, please feel free to contact me!

Contact Info:

Galvanized/ Galvalume Steel Coil as Building Material

 

The Galvanized Steel Coil is made by cold rolled steel sheet, and then through chromate, unoiled, various spangles, hot dipped. The surface is coated by zinc or Aluzinc. It is widely used as the raw material of building. We have exported our product to Middle east, Africa, South America, Ukraine for the good quality and best credit.

 

Pre-painted PPGI/PPGL Steel Coil

 

The PPGI/PPGL coil is made by hot dipped galvanized/galvalume steel coil. The coated with organic fluorine resin which has good appearance of anticorrosion. The steel grade is ASTM A653 and type of coating is epoxy and polyester. Its coating has good adhesion, high tenacity. We have exported our product to Africa, South America, India, Dubai, Algeria, Iran, Ukraine, Turkmenistan, and Malaysia for its advantage of durable, antirust and fireproof.

Steel sheets

 

The GI/GL/PPGI/PPGL Steel Coils can be cut or corrugated into steel sheets, according to the width and thickness.

The shape can be plain, waved, trapezoid, glazed tile and profiling sheets.

Usually the steel sheets are used for wall and roof for prefabricated buildings.

 

Steel Coil & Steel Sheets

Galvalume Steel Coil,Galvalume Steel Sheet,Prepainted Steel Sheet,Galvanized Steel Coil

HEBEI WEIZHENGHENG MODULAR HOUSE TECH CO., LTD , http://www.sinowzh.com