Development of self-leveling materials The maxit Group has been producing floor materials for more than 100 years. In 1970, the company invented self-leveling materials that were cast with jet pumps and patented self-leveling products in 1975. At present, the company has dozens of self-leveling materials that can be tailored to the ground to accurately meet the needs of each customer. The ABS self-leveling and durable ground system is recognized worldwide as an effective and unique solution to ground problems. ABS self-leveling and durable ground system is a one-component high-strength and quick-setting material that can be used after adding water and stirring on site by cement, fine aggregate and additives. Only water needs to be added during construction. It can be dumped on the ground base by mechanical (self-leveling agitation and transfer pump) or manually, and the floor material can be automatically leveled without equal operation. Fast construction, fast hardening, high strength and wear resistance. All materials are produced in the factory using an automated production line to complete the material ratio and full agitation, so the distribution ratio is accurate and the quality is uniform and constant.
The maxit Group has more than 30 years of experience in the development and application of ABS self-leveling floor materials. It has laid more than 100 million square meters of ground in the world. Its main customers are world-renowned companies such as Ericsson, Nokia and Siemens. .
The maxit Group has a number of self-leveling material manufacturers throughout Europe. At the same time, experts from the maxit group also serve on various EU committees. Therefore, the maxit Group's products represent advanced technologies throughout Europe and the world, providing an effective ground system while providing customers with a complete range of technical services.
An angle grinder, also known as a side grinder or disc grinder, is a handheld power Tool used for grinding (abrasive cutting) and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable power source has encouraged their use with a wide variety of cutters and attachments.
Angle grinders can be powered by an electric motor or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation. Certain angle grinders, depending on their speed range, can be used as sanders, employing a sanding disc with a backing pad or disc. The backing system is typically made of hard plastic, phenolic resin, or medium-hard rubber depending on the amount of flexibility desired.
Electric Angle Grinder,lithium electric tool
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com