The demand for industrial upgrading is released, and the cutting tool industry has entered the era of “post-crisis†– “2009 Advanced Manufacturing Process and Tool Technology Seminar†has an insight into the development trend of the industry.
"If it is not damaged by natural disasters, China will become the world's largest economy after the financial crisis." Former executive vice president and secretary general of the China University Cutting and Advanced Manufacturing Technology Research Association, now honorary chairman, Shanghai Huai Yuren In the seminar, the professor quoted a periodical commentary from a foreign authoritative media. This brief comment largely indicates the world's confidence in the Chinese economy, and it also conveys another message, that is, the Chinese economy. It will usher in a golden period of development after the crisis.
After the 2008 financial crisis, the international and domestic tool market began to face tremendous changes, the industrial structure accelerated, and the market structure began to reorganize. The Chinese tool industry is entering the “post-crisis†era along with the Chinese economy. The data shows that China's machine tool consumption last year exceeded the total of the three traditional machine tool consumption countries of Germany, Japan and the United States. The consumption of automobiles and machine tools ranked first in the world, which means that China is now the world's largest manufacturing country and a manufacturing power. Transformation, advanced manufacturing processes and cutting tools will usher in a vast market and huge development space.
Along with the recovery of the economic environment, the tool production that fell sharply in the first and second quarters of this year began to dawn after entering the third quarter. In addition, the policy environment is also good news. In 2009, the country accelerated the revitalization of the equipment manufacturing industry and launched the national science and technology major projects such as “high-end CNC machine tools and basic manufacturing equipmentâ€. The direct investment will exceed 2 billion yuan. In addition, the launch of domestic large-scale equipment manufacturing projects such as C919, ARJ-21 large aircraft, 10,000-ton destroyers and aircraft carriers, the domestic demand space was obviously released after the crisis. At the same time, major manufacturers and buyers have focused on optimizing their industrial structure, focusing on technology and product updates, improving technical strength and brand competitiveness, and began to focus on the changed "post-crisis" market.
Supply and demand on the same stage: SAMTT-2009 focuses on the industry
From November 1st to 2nd, the 2009 Advanced Manufacturing Process and Tool Technology Seminar (SAMTT-2009) hosted by Shanghai Institute of Advanced Technology and Tool Technology (IATCT-SHU) and Shanghai Dongbo (International) Exhibition Co., Ltd. )" was held at Shanghai University. This seminar attracted the design, manufacturing, and purchasing managers of auto parts manufacturers including GM, Volkswagen, and Jianghuai; design, manufacturing, and purchasing decision makers of well-known tool manufacturing and sales companies at home and abroad; automobile and tool industry associations and universities More than 200 professionals from the research institutes and other experts attended the conference. Dongfang Daily (net) and Tongguang Media provided full media support for the conference.
Well-known foreign tool suppliers: Germany MAPA, Sweden SECO, Arthur-klink, Germany KELCH, WALTER, Germany, Oerlikon Balzer Balzers Coating, Sweden Sandvik tools, Kennametal tools, Heller machines, ANCA machines, ARHO tools, etc. Representatives also participated in the seminar and conducted product and technical exchanges on site.
In addition, China Machine Tool Industry Association Tool Branch, China Automotive Tool Technology Professional Committee, American Machinery Manufacturing Technology Association, Beijing Institute of Technology, Shandong University, Donghua University, Jiangsu University, Zhejiang Electromechanical Vocational and Technical College, Xinxiang College, Shanghai Volkswagen, Volkswagen Assemblies, Shanghai GM, SAIC, Nanjing Mingjue, Changhe Suzuki, FAW Group, Dongfeng Motor, China National Heavy Duty Truck Group, Jiangling Motors, Fiat Power Technology, Haliang Group, and many domestic media also sent representatives to attend the seminar. .
During the meeting, the former executive vice president and secretary general of the Chinese University Cutting and Advanced Manufacturing Technology Research Association, now the honorary chairman, Professor Yu Huairen from Shanghai University; the chairman of the China Automotive Tool Technology Committee and the director of the Automotive Tool Research Institute of the South-Central University for Nationalities Wu Jianjun Gao Gong; Secretary-General of the Tool Tool Industry Branch of China Machine Tool Industry Association, Professor Shen Zhuangxing, former director of Chengdu Tool Research Institute; Professor Da Shiliang, senior manager of Shanghai General Dynamics Assembly; research on cutting and advanced manufacturing technology in Chinese universities Deputy Secretary-General, Professor Liu Zhanqiang from Shandong University; Dr. Liu Gang, Director of Shanghai Tool Factory Technical Center; Dr. Liu Hao, Technical Director of Xiamen Golden Heron Special Alloy Co., Ltd.; Vice Chairman, Cutting Advanced Technology Research Association, Metal Cutting Tool Technology Association, China Machinery Industry Chairman of East China, Professor Chen Ming of Shanghai Jiaotong University; Dr. Wang Yongguo from Shanghai University of Technology; Professor Zhang Shuqiao, Senior Manager of Shanghai Volkswagen Engine; Manager of Shanghai Volkswagen Powertrain Huang Zhiming has made a wonderful report.
Other well-known tool experts attending the conference included: Deputy Chief Engineer of the Ninth Design and Research Institute of the Machinery Industry, Professor Gao Laiming, a national design master; Professor Zhao Bingyan, Consultant of the Tool Tool Industry Association of China Machine Tool Industry Association and former Director of the Chengdu Tool Research Institute Gao Gonggong; Honorary Director of Metal Cutting Tools Technology Association of China Machinery Industry; Professor Gao Xiang, Senior Director of the former Chengdu Tool Research Institute; Vice Chairman of China Metalworking Metal Cutting Tool Technology Association, and Deputy General Manager of FAW Process Equipment Company Zhang Yunshan Gao Mr. Hu Zuguang, deputy chief engineer of Shanghai Tool Factory Co., Ltd.; executive director of China Metalworking Metal Cutting Tool Technology Association, vice chairman of the former College of Cutting and Advanced Manufacturing Technology, Professor Yu Qixun of Beijing Institute of Technology; former Harbin Mr. Shi Keqin, chief engineer of a tool factory, and Professor Li Ming, director of the Department of Mechanical Automation Engineering of Shanghai University.
The meeting was also highly valued by the Zhabei District Government. At the meeting, Zhabei District announced the idea of ​​preparing the “Shanghai Advanced Manufacturing Technology and Tool Industry Development Research Center†in the North Industrial Park. Mr. Hu Jianmin, Director of the Zhabei District Science and Technology Committee Mr. Gao Zhimin, Executive Deputy Director of the Science and Technology Department of Shanghai University, unveiled the “Shanghai Advanced Manufacturing Technology and Tool Industry Development Research Centerâ€.
Market changes: manufacturing procurement presents a new trend
The 2008 financial crisis has brought a big shock to the tooling equipment and materials industry, but in the near term, the industry's overall development has maintained a high confidence index, which is visible from the number and quality of SAMTT-2009 participating companies. A spot. Now that the tide of the financial tsunami has receded, the domestic environment has begun to recover. Both manufacturing companies and purchasing companies have adopted a positive response attitude to adapt to the changing market structure.
From the demand side, Shanghai Volkswagen, Volkswagen Powertrain, Shanghai GM, SAIC, Nanjing MG, Changhe Suzuki, FAW Group, Dongfeng Motor, China National Heavy Duty Truck Group, Jiangling Motors, Fiat Power Technology, Haliang Group and other large tool consumers This collective meeting shows that the demand for tools in the domestic manufacturing industry, especially in the automobile manufacturing industry, has entered an accelerated recovery phase.
Dr. Shi Shiliang, senior manager of Shanghai General Dynamics and Dr. Liu Gang, director of Shanghai Tool Factory Technical Center, said in the speech: “After the crisis, the domestic automobile manufacturing industry is generally facing the problem of industrial upgrading, technological innovation and optimization of production lines. It will enhance the demand for new technologies and new products. Therefore, for domestic tool manufacturers, there will be a corresponding strategic transition period. At the same time, they also said that the improvement of modern manufacturing methods will enable manufacturers to adjust the selection criteria of tools. The choice of high-speed cutting tools will emphasize the overall efficiency of the system, and whether the tool products can meet the flexible requirements of the production system. Will become an important criterion for bulk purchase.
General Motors, Volkswagen and other major domestic automakers will adjust the production line upgrade and purchase intentions to a certain extent, which will affect the R&D direction of the future tool manufacturing industry. With the new results and new products, the existing domestic market The supply and demand pattern will also undergo restructuring.
From the perspective of manufacturing suppliers, Germany's MAPA, Sweden's SECO, Arthur-klink, KELCH, WALTER, and Oerlikon, Switzerland Balzers Coating, Sweden's Sandvik knives and other well-known domestic and foreign companies have also participated in this seminar with their products. MAPAL, KELCH and BALZER have taken the opportunity to use the SAMTT-2009 platform to showcase many The new technology has introduced new research and development achievements in the fields of cutter head, tool holder and coating, and has reached a number of on-site transactions.
It is worth mentioning that SAMTT-2009 also invited the participation of many university research institutions in China. The joint venture of “production and research†has become another major topic of this seminar. The participating companies actively seek in-depth cooperation with university research institutions to make use of The latter's accumulation in research and development technology will transform new research results into new productivity.
Throughout this seminar, whether it is the joint presence of enterprises and R&D institutions, or the high-profile appearance of brand enterprises carrying products, or the adjustment of procurement standards of demanders, it undoubtedly conveys a message to the industry that the market is changing.
Platform upgrade: SAMTT-2010 will be held concurrently with Shanghai International Machine Tool Show
On the evening of November 1, at the invitation of the organizers of the conference, nearly 200 professional guests attended the theme dinner. During the meeting, Ms. Wang Hua, deputy general manager of Shanghai Dongbo (International) Exhibition Co., Ltd. delivered a short speech and expressed her sincere invitation on behalf of all the guests at the 2010 Shanghai International Machine Tool Show. At that time, at the Shanghai International Machine Tool Show, Shanghai University Advanced Technology and Tool Technology Research Institute and Shanghai Dongbo (International) Exhibition Co., Ltd. will jointly build a broader and more effective communication platform.
The “2009 Advanced Manufacturing Process and Tool Technology Seminar†was successfully held. The experts and guests at the conference unanimously agreed that this academic, research, application and comprehensive service integration platform for production, learning, research and business information is expected to be Form a continuous mechanism. As an indispensable supporting industry for the equipment manufacturing industry, the tool industry is a key area of ​​focus for both parties. Therefore, the addition of SAMTT-2010 to Shanghai International Machine Tool Show will undoubtedly promote the joint upgrade of the seminar platform and the exhibition platform, which will help the two sides share the results of the seminar. To facilitate the docking of upstream and downstream enterprises in the industrial chain.
Shanghai (Dongbo) International Machine Tool Show is the current mainstream machine tool exhibition in the Asia-Pacific region. It has long been committed to the establishment of a comprehensive machine tool exhibition platform integrating “production and researchâ€. With the increasing degree of specialization and brand influence, EASTPO2010 will exceed the scale of 800,000 square meters of exhibition halls, and it is estimated that there will be more than 110,000 professional visitors at home and abroad. Previous exhibitions not only gathered many well-known domestic machine tool manufacturers, but also attracted many industry research institutions and exhibitors. The number of high-end forums was also increased year by year. The integration platform of “production, study and research†was gradually formed.
It is worth mentioning that SAMTT, as the current authoritative and professional industry research platform in China, has been in the forefront of industry trends and promotes the development of the industry. It not only gathers many well-known domestic and foreign automobile manufacturers, machine tool demand enterprises, their The joining of the group will greatly enhance the purchasing power of the exhibition site. In addition, the move will provide more and more direct dialogue opportunities for machine tool companies and tool companies. The potential needs of both parties will be transformed into business opportunities in the exchanges, and truly achieve the same win-win situation in the equipment manufacturing industry.
Hot-dipped Galvanized Wire
Hot dipped galvanized wire belongs to the primary wire products of galvanization. The common sizes of hot dipped galvanized are from 8 gauge to 16 gauge, we also accept smaller or bigger diameter for customers' choices. Hot dipped galvanized wire with firm zinc coating provides strong corrosion resistance and high tensile strength. This kind of wire is widely used for making handicrafts, woven Wire Mesh, forming fencing mesh, packing products and other daily uses.
Hot Dip Galvanized Wire,Hot Dipped Galvanized Coiling Wire,Hot Dipped Galvanized Spool Wire,Big Coil Hot Galvanized
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.ironnailwiremesh.com