There are crystal plates, blister plates, paints, uv plates, etc. on the surface of the cabinet, which is better for home use.
>>> Related Links: How The Old Kitchen Makes A Gorgeous Change With New Cabinets
Cabinets for household use
Crystal door: It has the advantages of luxury, beautiful, etc. It is an ideal decoration material. Wafer heating is flexible, easy to mold, quick and easy construction and installation. No pores on the surface, waterproof, moisture, fume-stain, clean and easy to handle.
Blister board: The advantage of Blister board is its high abrasion resistance. It can be cleaned directly with steel balls without damaging the surface and color. However, the disadvantage of the blister board is that it is afraid of heat. Even a small cigarette butt can damage the surface of the film.
Paint board: poor wear resistance, good water resistance and moisture resistance.
On the market, there are several common types of cabinet panels, such as paint plates, mirror resin plates, blister plates, fireproof plates, and three hydrogen ammonia plates.
Test one: wear resistance
Test method: Scraping was performed on the five types of panels with the same strength using steel balls and their degree of wear was tested.
Test conclusion:
In terms of abrasion resistance, the wear resistance of the mirror resin board and the baking paint board is not good because they have a smooth surface, so scratches during use will leave marks on the panel.
Tri-hydrogen ammonia board blister board and fire board have good wear resistance.
Test two: waterproof performance
Test Method: Immerse the five panels in water for 24 hours to see how they deform.
Test conclusion: In waterproof performance:
The waterproof performance of the fireproof board is the worst, and the deformation is serious after the water immersed. This is because the fireproof board is formed by hot pressing.
Trihydromethane plates are generally water-repellent and have slight swelling after immersion in water.
Painted plate, mirror resin plate and hydrogen ammonia plate have good water and moisture resistance
Test three: high temperature performance
Test method: We used an electric iron heated to 100 degrees Celsius to simulate the effect of high temperature operation in the kitchen on the cabinet.
Test conclusion: In terms of high temperature performance, the surface of the blister board has the worst temperature resistance performance. Because its surface is a layer of PVC film, it will leave an imprint when it encounters high temperatures.
The high-temperature resistance properties of the lacquer board and the mirror resin board are general, because they are discolored when they are heated, but after a few minutes, the discoloration is greatly improved and the board is restored to its original state.
The polyhydrogen ammonia board and the fire board have the best high temperature resistance.
testing report:
Abrasion resistance Water resistance High temperature resistance
Paint plate is generally good
Mirror resin board is generally good
Trihydrogen ammonia plate is generally good
Fire board is good
Blister board is good
High-purchase consumers who have high color requirements can choose paint cabinets or mirror resin cabinets, but due to their resistance to scratching, they need to pay attention to maintenance and maintenance.
If you have high requirements for the shape of the cabinet panel, you can choose to blister board because of its three-dimensional shape is very rich.
Consumers who are pursuing simplicity and emphasizing quality and low cost can choose tri-hydrogen ammonia board to make your home cabinet.
If your home has a high kitchen usage, with particular emphasis on durability and willingness to sacrifice the aesthetics of some cabinets, then you can choose fireproofing boards.
Cabinets to buy lacquer simple decorative cabinet door home cabinet cupboard door kitchen cabinet door
Bathroom Accessories,Lever Sink Taps,Faucet Wash Basin,Handle Bath Faucet Single
Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com