It can be seen from Fig. 5 that the factors B, C, and D are substantially parallel, indicating that there is basically no interaction between factors B, C, and D. There is an intersection between the factor A curve and the factors B, C, and D, indicating that factor A interacts with B, C, and D factors. A comprehensive examination of the interaction of various factors on the forming performance is the direction of further research.
By examining Figure 5, it can be concluded that A1B3C3D3 is the optimal combination of factors. That is, the side position gate, the uniform cooling layout, the 2 s filling time and the 1.4 mm diameter gate process combination.
This combination happens to exist in the L 9 (3 4 ) orthogonal test table. If it does not exist, it can be confirmed by simulation analysis.
4. Conclusion
Through orthogonal test method, the author applied MudflowMPI injection molding analysis software for injection molding simulation, and analyzed the four process factors of gate location, cooling scheme, injection time and gate size, and obtained the best process plan and process parameters. It can be concluded that the position of the injection molding gate should be such that the flow direction of the melt is relatively symmetrical with the structure of the plastic part. The cooling system should make the plastic parts cool as evenly as possible. The injection time can be considered in consideration of the fluidity, crystallinity and mold temperature of the plastic. Prolonged to reduce the injection pressure, the gate size can be appropriately enlarged according to the fluidity of the melt, and the injection pressure can be reduced to reduce the residual stress of the product, so that various factors can fully reduce the warpage deformation of the plastic part.
For more articles, please refer to "Metal Processing" Cold Processing 2008 No. 1
Previous page
Ground Screw For Beach Umbrella
The Ground Screw for beach umbrella - Made out of strong PVC in order for it to withstand winds up to 60 MPH. The Beach umbrella sand anchor does a terrific job when it comes to resisting strong gusts of wind. The Anchor(anchor screw) maintains the umbrella erect, preventing it from blowing away with the wind. Now you can enjoy time with your family at the beach instead of continuously fixing a falling beach umbrella.
The ground screw for beach umbrella- you will never have to worry again about carrying any heavy umbrella anchors, the easily portable umbrella sand anchor will fit perfectly in the accompanying accessory beach bag, which simplifies carrying your beach umbrella and anchor making it less of a burden.
Beach Umbrella Anchor,Umbrella Anchor,Beach Umbrella Sand Anchor,Umbrella Ground Screw
Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com