Foshan Sanshui Xiongying Metal Protective Material Factory Co., Ltd. is a high-tech company specializing in aluminum surface treatment technology research, production and service.
Since the establishment of the company, relying on the technology, equipment and talents of the National Key Laboratory of Beijing Institute of Technology, the company has successively researched and developed aluminum alloy leveling and brightening technology, aluminum alloy bright acid etching technology and aluminum alloy chemical scrubbing and smokeless polishing technology, etc. Patented technology and series products. In particular, the newly introduced bright aluminum alloy etching technology and aluminum alloy chemical matte smokeless polishing technology, but also brought about a major technological change in the aluminum alloy surface treatment.
At present, China's aluminum alloy anodizing production manufacturers, based on the majority of the traditional surface pretreatment technology, product homogeneity is very serious, lack of international competitiveness, many manufacturers of aluminum alloy products added value is very low, one ton The profit of aluminum is less than 5%, and many small and medium-sized manufacturers are difficult to survive. Dachang relied on the advantages of the brand. Although it occupied a certain market share, it could only rely on quantity to make profits, and it had not been improved technically. With the progress of other developing countries and the loss of China’s labor advantages and the improvement of environmental protection mechanisms, the cost of China’s existing aluminum processing industry will become higher and higher, and more and more manufacturers will gradually decline, and only continue to improve technology. It is the road to development.
Aluminum alloy leveling and bright technology is simple, no smoke, no flow mark, not only can produce polished flat material, but also can produce polished abrasive material. Its chemical sand surface is a new kind of chemical sand surface except acid sand and alkali sand. , Overcoming many of the drawbacks of traditional polishing. The technology has applied for a national invention patent. At present, the leveling light technology has been put into use in many aluminum factories and many hardware factories such as the Foshan Jinlan Group, and is one of the company's current major technologies.
The bright acid etching technology of aluminum alloy solves the world's dilemma of common eroded aluminum materials, producing a new type of bright acid-etched matte materials, which greatly enhances the surface quality of aluminum alloys. It is an existing common etching and alkali etching. Low-temperature polishing and other traditional technology replacement technology. The technology has declared two national invention patents. The market prospects of bright acid etching technology are very broad. Taking the production of about 1.5 million tons of ordinary oxide materials in China in 2005 as an example, if the entire generation is replaced, the output value of the product project can be increased by 1.5 billion yuan; the downstream manufacturers can increase the additional cost due to the improvement of the surface quality. The value of about 3 billion yuan, while saving 5-6 million tons of primary aluminum. The technology has been successfully put into production by many large-scale enterprises such as the Guangdong Xingfa Group and exported to Southeast Asia and other countries and regions. At present, large aluminum processing companies such as Asian Aluminum Plant, Fenglu Aluminum, Nanshan Group and Nanping Aluminum are actively negotiating and preparing.
The smokeless polishing technology of aluminum alloy chemical scrub completely solves the world problems of yellow smoke, flow marks, high drug consumption, and low yield of tri-acid polishing, and is the upgrading technology of existing tri-acid polishing and electrolytic polishing. The technology has declared two national invention patents. In 2005, a total of approximately 500,000 tons of polished materials were produced nationwide. If all of them were replaced, all types of acid (mainly phosphoric acid) would be saved by about 150,000 tons, yellow smoke and waste water treatment costs would be nearly 1.5 billion yuan, and product yields would be improved. Reducing the loss of manufacturers by about RMB 500 million has huge environmental value and economic value. The technology has been successfully put into use in Guangxi Nannan Aluminum and a number of hardware factories. Asian Aluminum, Xingfa Group and Nanping Aluminum are actively negotiating and preparing.
Countersunk Lock Washer DIN 6798V
Stainless Steel Countersunk Washer,Serrated Lock Washer,Conical Spring Lock Washer,countersunk tooth washers
Ningbo Yinzhou Zhenhua Stamping Co., Ltd. , https://www.fastenersstamping.com