When a rolling bearing is selected, it is generally selected only by the size of the shaft to which the bearing is fitted (i.e., the inner diameter) and the hole size (outer diameter) and width of the bearing housing. These specifications are the characteristics of the things discussed in this article. The standard parts library is fully parameterized when building the library. The main specifications are extracted from the model's size parameters and expressed using XML technology. I store the main specification parameters as KRX files in XML data format. When the program is running, I only need to read the XML file to display the specification parameters.
Standard Parts Library Management System Operation Example This system is integrated with UG NX software. After starting NX, there will be a menu bar for starting the system in the NX main menu bar, because the number of specifications of each standard part is inconsistent. Therefore, the drop-down list value of this type of control should be automatically loaded and dynamically generated by the system according to the standard component type. The generation should ensure that the positions of the controls in the interface do not overlap. At the same time, the main interface is provided to explain the specific size position of each specification parameter in the graphic.
After the user selects the specification parameters by dynamically generating the pull-down dynamic control, if you need to change the inserted position, just click the “screen pick point†button, dynamically take the point on the screen, and then click the OK button to apply the selected size. A three-dimensional digital model of this type of standard.
The main interface of the system (for setting the specification parameters of the selected standard parts) has developed a standard parts library based on the property characteristics table through the software-generated standard part three-dimensional model. Firstly, the principle of the property property table is used to standardize and extract the characteristics of mechanical components, form a component classification and a property property table; further use UG NX expressions and Partfamily to establish a part standard model and a serialized size driving table; finally, NX Open for.NET has developed a standard parts library management system, which enables the rapid design of standard parts. The system is open and easy to maintain, and it is easy to promote and apply in enterprises.
Plant Light Bulbs with E27/E26/G14 socket, E27 is normal, E26 G14 customzied, lamp with full spectrum lighting, each lamp can cover 0.8-1.2 square meter.
We can make any grow bulb you wanted, special bulb MOQ 500pcs, we are manufacturer, can offer you Best Grow Lights with lowest price.
Led Grow Light Bulbs,Grow Light Led Light Bulbs
Horticultural Grow Bulb ,Led Grow Light Par,Indoor Grow Bulb,Indoor Plants Grow Bulb
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwenyigrow.com