Geothermal heating floor is also called low-temperature hot water radiant heating floor. Low-temperature floor radiation is a system that utilizes the ground inside the building for heating. It is the entire floor as a radiator laying in the floor structure of the pipeline, through the pipeline into the low temperature of 60 °C below the heating floor concrete layer to maintain the ground temperature around 26 °C, make people feel warm and comfortable. The indoor temperature dropped evenly, giving people the best feeling of cooling their heads and heads, consistent with human physiological sciences.
effect
It saves the effective use of the room and saves energy. The actual temperature of the low-temperature hot water floor heating is 2°C to 4°C higher than the actual temperature. It complies with the requirements of “measured by household and temperature in separate roomsâ€. When no one is in the house, heating can be stopped. When the population is small, heating can be performed in rooms where people are active and the valves of unoccupied rooms can be closed. With long service life, the aluminum-plastic composite pipe used is a world-acclaimed material with a service life of 50 years. In addition, this heating method also has the characteristics of reducing floor noise, cleaning and hygiene, wide selection of heat sources, and adaptation to old houses.
Geothermal floor heating type
Reinforced and solid wood composite geothermal floor: cheap and stable, but not environmentally friendly Floors used in geothermal conditions are mainly selected on the floor to adapt to the cold and heat repeatedly transformed and conducive to heat conduction and health and environmental protection and other factors. It is usually less dry shrinkage, better thermal stability, temperature resistance and dimensional stability, and formaldehyde content meets standard and lower environmental protection floors.
The flooring that can be used for geothermal paving in the past is mainly laminate flooring and engineered wood flooring. Due to the high temperature compaction of the laminate flooring, the internal water content is reduced, and the flooring is not easily deformed; and because of its criss-cross structure and the special structure of the expansion joint, the composite flooring is decomposed by the stress generated by the heat and has a small deformation amount. The two are relatively stable, and at the same time they are cheaper than solid wood geothermal flooring, and they have become the main choice for geothermal flooring.
However, due to the requirement of geothermal floor to adapt to the repeated changes of hot and cold, due to the characteristics of the product itself, although there will be no problem under normal temperature conditions, formaldehyde release will be difficult to control under long-term heating conditions. , it will have the problem of excessive indoor formaldehyde. Therefore, laying laminate flooring and solid wood laminate flooring on the ground, although solving the problem of floor deformation, there are more hidden dangers, and it can only be considered a helpless choice.
Specially-processed solid wood geothermal floor: eco-friendly but high
For the formaldehyde problem, experts remind consumers that solid wood flooring is undoubtedly the best choice from an environmental perspective. If the home is geothermal heating, it is best to use high-quality, environmentally friendly solid wood flooring, the market is currently the best proof of Burmese teak flooring.
Compared with laminate flooring, solid wood geothermal flooring has good sound-absorbing effects and the ability to adjust indoor temperature and humidity in addition to its obvious advantages in environmental protection. Because the ordinary solid wood flooring is limited by the natural characteristics of wood, the floor should adapt to the extreme environment of ice and fire, and how to ensure the stability of the floor will be the biggest bottleneck of whether solid wood flooring can be used as a geothermal paving. However, the good news is that on the current market, many brands of solid wood flooring have overcome the bottleneck of solid wood flooring for geothermal heating through special technological transformations, and have achieved a natural geothermal environment while maintaining the natural characteristics of solid wood flooring. Extremely high stability, even the heat resistance of solid wood flooring is even better than that of laminate flooring. However, the price of solid wood geothermal flooring is high, and there are not many kinds of trees that can be selected. It is the disadvantage of solid wood geothermal flooring that is more floor-strengthened and solid wood composite flooring.
With the continuous development of floor technology, we will have more and more choices on floor heating. However, regardless of the type of flooring we choose, health guarantees should be our top priority.
3 solid wood floor heating advice
Good stability
The use environment of geothermal floor is complicated, especially in the northern area, the ground in the non-heating season is subject to all kinds of moisture, and the temperature of the ground when heating is increased suddenly, the floor will inevitably bear the double change of “temperature†and “humidityâ€. Therefore, the geothermal floor must have good material stability. Teak is the world's most recognized wood with the best stability. It is recognized as the best solid wood floor in and out of the industry, but its price is relatively high.
Good environmental protection
This is an indicator that consumers are most concerned about. After all, it is related to health and safety of use.
Reinforced, solid wood flooring, these are used glue, glue is composed of formaldehyde and benzene. Compounding floors have formaldehyde volatilization, and now many diseases are caused by the volatilization of formaldehyde and benzene. The environmental performance of the composite floor is no better, and it is difficult to withstand the repeated baking of geothermal heat. Especially in the state of high temperature for a long time, the high temperature will inevitably accelerate the emission of harmful gases, and the warm room is sealed, and the indoor environment can be imagined. Solid wood flooring is natural and there are no environmental issues.
High cost performance
Solid wood flooring can be reused, cost-effective ultra high, teak flooring has "has been a generation, benefit from several generations" in the world.
At present, there are multiple layers of imported geothermal heat, which are generally used for 10-15 years and domestically produced for 3-5 years. Solid wood flooring can be reused, in particular, the longer the teak flooring is used, the better the stability, and the more beautiful it is. Teak has a reputation of “having once owned, several generations of incomeâ€. If you like it, you can use it with children and grandchildren. It is not difficult to understand those teak palaces, temples, and luxury oil tankers that have been preserved for thousands of years. Of course, the premise must be authentic teakwood. Each teak floor of the forest tour comes from Burma's virgin forest.
Excellent thermal conductivity
Wood is a very good natural material. The ground heat is transmitted to the surface through the floor and there is bound to be heat loss. The ideal floor can control these losses within a reasonable range on the basis of taking good care of the foot.
Multi-layer solid wood is 12-15mm thick, solid wood is 18mm thick. Differences in the thickness of 3-5mm, some people believe that the thermal conductivity of solid wood is not as good as multi-layer solid wood. Practice has proved that pure solid wood is not inferior to multilayer solid wood in thermal conductivity. First, the thickness difference is very small. Second, multi-layer is a stack of solid wood skin and glue. This structure is especially high in coefficient of thermal resistance of glue. And geothermal installation is directly installed on the top of the geothermal layer, there is no air resistance problem, the air thermal resistance coefficient is the highest, so if it is installed with the traditional keel, there is a problem of air resistance.
Good heat insulation
Solid wood itself is the warm body of the cool winter and cool summer. The insulation effect of pure solid wood far exceeds that of solid wood composites and laminate flooring.
Flooring laminate flooring
Tub Shower Faucet,Shower Faucet Set,Tub And Shower Faucets,Shower And Tub Faucet Sets
AIHUI Sanitary Ware , https://www.fsaihuisanitary.com