The materials are thin wood, melamine impregnated paper, wood grain paper, PVC rubber sheet and polyester paint surface. At present, the veneer furniture veneers sold in the market tend to simulate wood grain, and the gloss and feel are good. Therefore, consumers should choose the color they like, and then carefully look at the production process, especially the edge-sealing process, whether the work is fine, whether there is unevenness or tilting, these are all at a glance. The following small series of home network teaches you to judge the three-step board furniture easily.
"Smell" mainly focuses on the formaldehyde release problem in furniture. The free formaldehyde of the panel furniture will cause a certain degree of pollution to the air in the living room. Before buying, you can open the door or drawer to smell it. If there is a pungent smell, it may be that the formaldehyde is exceeded. Of course, consumers can also ask the merchant to show the factory inspection certificate of the product. If you are not at ease, you should ask the merchant to send the product to the authoritative testing organization for professional testing, and pass the test with confidence.
“Q†is mainly for the connection of panel furniture. To ask the merchant, the connection method of the furniture hardware connector, and check the connector, try to test whether the screw is firm, whether the switch is free, whether there is noise, whether the surface coating is peeling off. If it is an eccentric connector, it depends on whether the connector and the plate are finely cut.
"Cut" is mainly for the problem of the board gap of the panel furniture. At present, the panel furniture on the market mostly uses plywood, and there is no seam around the board surface. If there is a gap, the process is not well handled. It is better to use the gaps of the door joints, drawer joints, etc., such as large gaps, indicating that the work is rough and the deformation will be long.
1.with 3000 square meter factory about 35 workshop workers and 25 office workers.
2.More than 20 sets of advanced machines with more than ten years domestic trade experience and international trade experience.
3.Manufacture and supply good quality automatic doors
4.With ISO 9001 Certification and many others certifications
5. Excellent DC brushless motor , high wear-resistant qualities wheels and reasonable structure design makes it more stable, quiet, longer life
6.Our Service system is perfect
Controller Dimensions : 85×124×600mm
Weight :12 kg
Maximun leaf weight :150 kg
Open range : 70°~115°
Closing speed : 10~43 cm/s
Door hold time :0.5~10 seconds
Main Power :AC 220V~250V,50~60 Hz
Maximum current :1A
Maximun motor power:55W
Wait Power :14W
Fuse :Minimum 3.5 ASlow
Operating Temperature : -30℃ ~+50℃
Swing Door,Exterior Swing Door,Aluminium Out Swing Door,Refrigerated Swing Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com