Old people activity site fire safety management system

News Related Keywords: No tags.

First, fire safety education and training system

1. Regularly study fire regulations and various rules and regulations so that the fire can be ruled according to law.

2. Demonstration and training of personnel on the maintenance and use of fire-fighting facilities should be conducted.

Second, fire inspection, inspection system

1 , conduct a fire inspection every month and review and improve.

2. During the inspection, a hidden danger of fire was discovered. The inspectors should fill in the fire inspection records and follow the regulations to require the relevant personnel to sign the records.

3. The timely detection and rectification of fire hazards discovered during the inspection.

Third, safety evacuation facilities management system

1. Keep evacuation passages and safe exits unobstructed. Do not use evacuation passages. It is forbidden to install obstacles such as fences on safety exits or evacuation passages.

2. Fire safety evacuation signs and emergency lighting facilities that meet the requirements of the State shall be established according to the regulations.

3. It is forbidden to lock safety exits during business hours.

4. It is forbidden to close, cover or cover the safety evacuation indicator during business or work.

IV. Firefighting and emergency evacuation plan drill system

1. Formulate fire extinguishing and emergency evacuation plans that meet their actual conditions.

2. Organize personnel to learn and become familiar with fire prevention and emergency evacuation plans.

3 , each organization should be carefully scheduled to conduct a drill before the deployment, a clear division of labor.

4 , according to the preparation of the plan, at least once every six months of a drill.

5. After the drill, a discussion meeting should be held to carefully summarize the situation of the drills for the pre-arrangement, and to find out the inadequacies, the plan should be revised and improved in a timely manner.

V. Inspection and Management System for Gas and Electric Equipment

1. Correct installation and use of electrical equipment should be carried out in accordance with regulations. Relevant personnel must undergo necessary training and obtain valid certificates issued by relevant departments before they can operate. All types of equipment are required to have valid certifications as required by laws and regulations and confirmed by the maintenance department before they can be put into use. Electrical equipment should be checked regularly ( at least once a month ) by licensed personnel .

2. Lightning protection and anti-static facilities shall be regularly checked and tested, at least once every quarter, at least once a year and recorded.

3 , electrical equipment load should be strictly in accordance with the standard implementation, joints firm, good insulation, insurance devices are qualified, normal and have a good grounding, grounding resistance should be strictly in accordance with the electrical construction requirements test.

4. All types of lines shall be isolated by casing. In special circumstances, well-insulated lead or rubber cables shall also be used. Various types of electrical equipment and lines shall be regularly overhauled, and fire safety hazards caused by insulation damage may be eliminated at any time.

5. It is forbidden to lengthen the wire without authorization. All departments should actively cooperate with the safety team and maintenance personnel to check whether the extension cord is for emergency use only, whether the housing is in good condition, and whether the maintenance department personnel has tested it and put it into use.

6 , in the vicinity of electrical equipment, switch box line in accordance with the unit standard delineation of the yellow area, is strictly prohibited accumulation of flammable and explosive materials and regularly check and eliminate hidden dangers.

7. When the equipment is completed, it should be cut off. Equipment that has not been tested for formal power-on, installation and maintenance personnel should cut off the power when leaving the site.

8. Except for those departments that have taken precautionary measures, the use of naked flames in the workplace is strictly prohibited.

9. The department that uses open flames should strictly abide by all safety regulations and operational procedures so that people will not be separated from fire and people will be extinguished.

10. Smoking is strictly forbidden in the place and a non-smoking logo is posted. Every employee is obliged to remind other people to comply with the smoking ban in public places.

The information in this article comes from the Internet and was reorganized and edited by China Rescue Equipment Network.

Chemical Anchor

Product characteristics:expansion anchor bolt, which can be installed and used immediately
The barbed triangular cone is easier to hang upside down on the concrete
During the expansion process of irregular convex point clip, the stress point is increased, and the right angle design is adopted at the edge of the drawing source, which makes it easier for the clip to grasp the concrete
The annular pattern has anti-skid effect and increases the friction of the clip
The cooling material is more tough to avoid installation damage
Half / full bolt design, wider applicability
The model of drill bit is consistent with the diameter of anchor bolt, which makes the installation easier and less damage to the substrate

Chemical Anchor,Best Chemical Anchor,Sleeve Chemical Anchor,Chemical Anchor Fastener

Taizhou Risco Stainless Steel Products Co.,Ltd , https://www.riscofastener.com