In the main event space of our house, the ground has become our closest partner. Due to its durability and wear resistance, floor tiles become one of the first choices for today's floor finishing materials. In the home improvement, the construction of the floor tiles is the highlight. The construction of the tiles must not be sloppy. Let's take a look at the order of the paving tiles.
Paving tile order
1, from the living room to the room Many owners of the decoration of the brick paving is in accordance with the order of the first living room after the room, this order is from outside to inside, from a door to the shop, from the living room to find all the rooms, so that the overall effect it is good.
2, from the room to the living room from the room to the living room floor tile is also a common practice, from the inside out, this way is mainly to prevent trampling just posted a good floor tiles, floor tiles to prevent adhesive layer hollow.
3, each paving the living room to separate the separate brick floor tile, this method is mainly to save floor tiles, reduce the number of cut, and finally the location of each door is covered with darker colors of the floor tiles or marble slabs, the effect is not bad.
What should I pay attention to when laying floor tiles?
1. The materials used for the indoor floor are generally Jingshifang antique tiles, which can be tiled and tiled with 1:2 cement mortar.
2, cleaning the grass ground floor leveling → cement mortar leveling → high calibration, bombing line → selection of materials → water soaked in wet materials → installation of standard blocks → paving cement mortar → paving ceramic tile → pouring → cleaning → maintenance delivery.
3, the grassroots treatment should be clean, flattened and repaired at the uneven level, the grassroots should be clean, can not have mortar, especially lime-ash mortar, oil stains, etc., and wet the ground with water. When laying porcelain tiles must be placed standard blocks, standard blocks should be placed at the intersection of the cross line, diagonal installation.
4. The paving operation should be carried out in the order of each line. The maintenance of the porcelain tile after the paving is very important. After 24 hours of installation, it must be sprinkled to protect the water.
5, before the laying of the tiles to try spelling, the flower, color, number, in accordance with the laying out of the ground color consistent.
6, the tiles must be soaked in water, so as not to affect the coagulation and hardening, empty drums, shelling and other issues, after the completion of paving, 2-3 days shall not trample.
Paving brick process
1. When paving the floor, you should clean the floor to be constructed, and the damaged floor or loose ground should be handled at the same time.
2, pop-up baseline, standard height, horizontal wall line.
3, floor tiles should be checked before laying tile color number and whether there are quality problems, such as the discovery of material quality problems should be promptly notified to the person in charge, the relevant person in charge can be properly resolved before construction.
4, the ground floor should be rough and clean and wet, such as a smooth surface should be pre-cut hair, in the plaster before the water should be wet cement floor.
5, paving tiles generally use 32.5 ordinary cement. The proportion of sand is 1:2.5. Pay attention to the color number and pattern in the process of paving, and no damage.
6. The cement mortar for paving tiles must be semi-dry and semi-dry. With this type of ash paving, after a few days, the moisture in the cement mortar volatilizes, and the mortar below the floor tiles will collapse and empty tiles will appear.
7, when paving bricks, bricks must be compacted with rubber hammers, that is, the combination of bricks and mortar is solid, and the mortar below the bricks can also be compact.
8. After paving, do not step on or walk before the cement mortar has been solidified. Spread hard paper or carpet on the surface to protect the surface finish of the plate. Use hooking agent (or white cement plus latex or 108 glue) hook every.
9, the original tile, need to be re-paved, the original brick shovel out, otherwise it is difficult to paste firmly.
10. Pay attention to the protection of tile tiles and do not allow dirt to penetrate the brick surface.
Summary: The above is the content of the paving tile that Xiaobian introduced for everyone. I hope you can help us effectively. For more information, please pay attention to this site.
Renovation Raiders Decoration Co., Ltd.
The product range of Hongchuang hardware fasteners includes hexagon head screws, full thread and half thread hexagon socket head cap screws, hexagon wood screws, hexagon socket head cap screws, full thread and half thread hexagon socket countersunk head screws, hexagon socket head flange screws, set screws, etc. We provide products conforming to DIN, ANSI and JIS standards.
Stainless steel of grade 304 contains nickel of 8% and chromium of 18% and is the most commonly used grade for the production of fasteners. It possesses an excellent combination of strength, corrosion resistance and fabricability. Fasteners of this grade are being extensively used today in almost every industry.
Metal Screw,Self Tapping Screws,Stainless Steel Screws,Steel Screws
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com