1 Look at the gap: It is the wooden seal line, corner line, waist line facing panel seam not exceeding 0.2mm, the angle between the line and the line mouth seam does not exceed 0.3mm, and the interface between the panel and the panel does not exceed 0.2mm, sliding door entire surface The error does not exceed 0.3mm. 
2 Look at the structure: The structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight. 
3 Look at the corner: Is the corner accurate? The normal corners are all 90 degrees, except for special design factors. 
4 Look at the parquet: Whether the parquet is tight or accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance. 
5 Look at radian: Whether radian and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape. 
6 Look at the cabinet door: Is the cabinet door switch normal? When the door is open, it should be light and no noise. 
7 Look at the leveling: The surface of the woodworking project should be kept flat and there should be no drumming or breaking. 
8 Look at symmetry: Symmetrical carpentry projects are symmetrical. Carpentry engineering woodwork acceptance
A sliding gate is a type of gate that operates by sliding horizontally along a track. It is commonly used for driveways, entrances, and other areas where a traditional swinging gate may not be practical or space-efficient.
Sliding gates are typically made of metal, such as steel or aluminum, and can be automated or operated manually. They are often equipped with wheels or rollers that allow them to slide smoothly along the track.
Automated sliding gates are controlled by an electric motor that opens and closes the gate. They can be operated using a variety of methods, including remote controls, keypads, or sensors. Some sliding gates also have safety features, such as obstacle detection sensors, to prevent accidents or damage.
Sliding gates offer several advantages over other types of gates. They require less space to operate since they don't swing open or closed. This makes them ideal for properties with limited space or steep driveways. They are also more secure and harder to force open compared to swinging gates.
However, sliding gates do have some limitations. They require a level and smooth surface for the gate to slide properly. They can also be more expensive to install and maintain compared to other types of gates.
Overall, sliding gates are a popular choice for homeowners and businesses looking for a convenient, secure, and space-saving gate solution.
Sliding Gate,Swing Gate,Security Swing Gate,Garden Gate
Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com