Soft decoration is very good for home decoration. If you feel that your home's color or layout is not ideal, you can use soft decoration to make certain adjustments. Many families use vases to arrange flowers, but vases are very skillful. Therefore, Xiaobian will introduce the vase flower arrangement skills for everyone.
1. Group tying method: Some wild flowers and flowers are bright and moving, but the flowers are very small. One or two branches of flowers do not represent the United States. Good results are often concentrated before they can be revealed. Therefore, in the flower arrangement, the flowers can be clasped and tied with a rope or metal wire and then inserted.
2, flower socket piece method: the size of the flower socket is limited, and sometimes in order to produce a large flower arrangement. Single flower socket is not enough. For multiple flower arrangements, several flowers can be put together and nailed together with several twigs.
3. Inverted deduction method: When using woody flower arrangements, it is inevitable that it will cause heavy flowers, light sockets, and lodging. At this point, a flower socket can be overturned on the side of the flower socket to increase the weight.
4, wire around the entanglement method: In order to support some flowering branches and to overcome the defects in the shape of the flowers, flowers can be Rotary shape. A metal wire with a hardness enough to bend the branches is wrapped around the entangled branches and bent according to their own ideas. However, the metal wires can not be too thick and can not affect the ornamental effect of the flower arrangement. If necessary, you can wrap the wire with a layer of green tissue or apply green paint. In this way, the bending of the flower branch can be freely changed and it can do as it pleases. This method is used to treat soft flowers.
5, wire through the heart law: some flower stalk central is empty, such as gold chrysanthemum, celery flowers and gerberas, etc., you can choose the thickness of moderate wire, insert from the incision, you can also from the stamen The center is inserted. This method will not affect the appearance of flowering branches, but also can make flower branches bend freely, but non-hollow flowering branches, such as carnation, chrysanthemum, etc., can not be used this method. In the process of threading through the wire, if it is difficult to reach the upper flowering branch or near-flowering branch, it should be based on detailed information, or it may be appropriate to stop it from penetrating the flowering branch, or through the department and the department.
6, insert wedge modeling method: For rough woody flowers, in order to achieve the natural beauty of bending, without revealing artificial traces, available triangular wedge wood, insert into the shape of the branch incision. Wedge wood requires the use of the same kind of plant material. The thickness should also be the same size. The flower school made in this way is soft and pleasing to the eye, but it is generally very embarrassing and it will not affect the absorption of water by the branches.
7. Incision bend technique: The bending angle required for woody flower technique is not large. Scissors can also be used to cut stems obliquely. The depth of incision should not exceed 2/3 of the diameter of the stem, and then both sides of the incision should be gripped with both hands, slowly bending the branches. . If the toughness of the shoots is strong, insert small pieces of wood into the cuts.
8, leaf rolling method: There are some flowers such as loquat leaves, books with grass, etc., can change the original shape by curling. The method is to take a blade and flatten it, use a thin stick to roll the blade from the tip to the leaf stem, and pull out the thin stick for repeated kneading until the hand is released. The blade still has a certain curl. If you want to show spiral shape, you can roll the blade diagonally and make it spiral after shaping.
9, circle leaf method: There are petiole and leaf soft leaves, such as loquat leaves, ginger flowers and other leaves, you can take a blade for bending, and a small hole in the tip of the blade, and then penetrate the petioles. The size of the circle can be expanded or reduced as needed. Treatment needs to prevent tearing of the blade.
10, support the setting method: This method is to use external forces to change the flower shape. First, prepare some metal wire and transparent glue. Then take the leaves that need to be treated, and lay the leaves face down. Find the central vein, attach the wire to the edge of the center vein, and glue it with transparent glue. In this way, the number of bends required can be adjusted. However, the site of the treatment is exposed on the front.
Editor's summary: The vase flower arrangement technique is introduced here and I hope to help everyone. If you want to know more related information, you can pay attention to this website information.
Dining table vase balcony vase modern vase blue vase home vase
Rxiry (Jiangsu) Optoelectronic Co., Ltd , https://www.rxiryrangefinder.com