Among the cabinet types, the paint cabinets are more "loved" by people. However, the overall cabinet maintenance of the paint is particularly important, then follow the small series to introduce the maintenance method of the whole cabinet.
Introduction to the maintenance method of the baking cabinet
In the process of use, acid and alkaline substances should be avoided to contact the surface of the paint door to avoid corrosion of the paint film of the door. If the soy sauce and vinegar are accidentally sprinkled on the surface of the door during use, clean it with a clean cotton cloth and a little water.
Tip 1: Avoid direct sunlight
The paint film of the paint door panel will change color due to high temperature. Therefore, it should be avoided to use direct sunlight on the door panel during use. If the sunlight can be directly on the door panel through the window, it is recommended to make some shielding on the window.
Tip 2: Cleaning
In the daily use process, it is difficult to avoid soot in the kitchen. When there is oily smoke or oil stain on the surface of the door panel, wipe it with detergent. Wipe it with a clean cotton cloth with detergent. Be sure to wipe it with water after scrubbing with detergent. Otherwise, it will cause color cast after a long time.
Tip 3: Anti-scratch
The thickness of the paint film on the surface of the paint door is about 0.3mm. It is afraid of bumps and scratches. Once it is damaged, it is difficult to repair and needs to be replaced. Therefore, it should be carefully used during use. Avoid sharp objects on the door surface during use.
Tip 4: Anti-collision
The hardness of the paint film of the high-quality paint cabinet door is about 2H, that is, the weight of 10kg is on the front of the door panel. Although the paint film of the door panel will not fall off a large area, the door panel may be pitted. Therefore, the paint door is in use. Try to avoid hitting the door panel, pay attention to the opening and closing, and avoid collisions such as handles.
Plant growth lighting refers to a technology that provides artificial light sources for plant growth. This lighting technology is mainly used in environments such as indoor cultivation, greenhouse cultivation and vertical farms, and is designed to provide the spectrum and light required by plants to promote their growth and development.
Plants convert light energy into chemical energy through photosynthesis, and different stages of plant growth require different wavelengths of light. Therefore, plant growth lighting systems often use a specific spectrum, such as a combination of blue, red, and white light, to maximize the light needs of plants.
LED plant growth lights have become the mainstream choice for indoor farming lighting. They have the advantages of low energy consumption, high efficiency and long life, providing high-quality light while reducing energy consumption and heat generation. In addition, the LED light source can also adjust the light intensity, spectrum combination and light period through the intelligent control greenhouse lighting system to adapt to the growth needs of different plants.
The application of plant growth lighting allows efficient plant cultivation even in environments where adequate sunlight is not naturally available, as the supplemental lighting. It can extend the time of light, improve the form, quality and yield of plants, so as to achieve the early ripening and increase of crops. Ongoing developments and innovations in plant growth lighting technologies will open up more possibilities for indoor agriculture and growing in special climatic conditions, and play an important role in global food security and agricultural sustainability.Plant Growth Lighting, Indoor Farming Lighting, LED Plant Growth Lights, Supplemental Lighting, Greenhouse Lighting
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com