Mason Decoration Construction Procedure Decoration Mason Attention

Mason decoration is a major renovation project following the renovation of water and electricity. So, what is the construction process of a mason decoration? What are the notices for the decoration mason ? Let's take a look at the following with Xiao Bian. I hope that everyone can use it to decorate.

Mason renovation construction process

1, the construction process

Sealing troughs, cooking stoves, shop kitchen wall tiles, shop kitchen floor tiles, balcony wall ground, dining room floor, bedroom floor leveling (in case of the bedroom shop to strengthen the owners), kicking corners and other woodwork after installation .

2. After entering the site, the mason first seals all the walls of the hydroelectric pipeline, and the circuit on the ground is well protected. The wall has been painted well. If the kitchen owner chooses to dig the stove, prefabricate the prefabricated panel. Rehearse the stove and focus on the vertical and horizontal lines of the prefabricated panel. Convenient woodworking and countertop installation in the future.

3, kitchen and brick building between the essentials, first place the pipes do not have the place of the pipe, use prefabricated panels wrapped pipe before paving the wall tiles, walls to do a good hanging line, lay flat water, pull Vertical line. Lay out in accordance with the position of the pull line, pure cement paving, pay attention to color and crevices. In the case of a corner, it will open at a 45-degree angle. The waistline is about 90 cm. The kitchen is kept 2.5-2.8 meters away from the ground and the toilet is 2.3-2.6 meters above ground. Except special circumstances. Floor tile paving should first be optimistic about the placement of the slope, the slope is controlled within 1%, all the slopes of the drainage slope to the direction of the drain. For good suits, cement sand mixes dry shop. When encountering a stool to build a floor, the floor should be filled with cement sand and dry sand, and it should not be filled with pure sand.

4, guest restaurant floor tiles, playing a good level, pull two lines. Control the paving thickness when pulling the wire. Cement and sand dry-laid paving, starting with a wall edge, when paving, pay attention to cement and sand material to be filled. The expansion joints are 1 cm away from the wall. In the living room and bedroom sill, I asked the customer to put stones on them to make the transition beautiful.

5. The sill bricks and window sill tiles are used to protect the inner sill and the inner wall. When laying, put slopes to pour water on the outside. Plays a waterproof role. Some of the inner platforms are made of wood for woodworking or window coverings, but also for stone countertops.

6, the balcony wall ground paving with the above similar basic construction.

7. In the case of laminate flooring in the owner's bedroom, the floor in the bedroom must be leveled with concrete sand. The height of the leveling floor is 1-1.5 cm lower than the floor of the guest hall. When leveling, use the ruler to shake. Maintain the flatness of the ground.

8, after the installation of various types of ceramic tiles and the ground is good, the door sill, the inner sill and the countertop of the kitchen and bathroom can be installed with stone.

9. After the finished product is protected and the mason is finished, paper is laid on the floor of the floor tile. To prevent carpenters from accidentally injuring tiles during construction.

Decoration Mason Notes

1, cement can not be used more than three months out of the factory.

2. Different types and grades of cement cannot be mixed.

3, yellow sand must use river sand.

4, wall and floor tiles should be soaked in water for more than two hours, after drying can be posted.

5, wall tiles would rather buy a few more, do not buy less, or prone to color.

6. There cannot be two rows of non-complete bricks on one wall.

7. Clean the tiles immediately after the sew.

8, the ground paste marble (light color), stone back to do waterproof.

9, Yang angle to cut 45 degrees.

10, floor tiles to be inclined to drain, otherwise it is easy to collect water.

11, wall tiles hit the pipe mouth to use the cut form, so it looks like a whole block of bricks.

12, ground marble should dry shop.

13, floor tiles must be dirty, non-slip, do not just look good.

14, matt tiles difficult to clean.

15, balcony floor tiles should pay attention to the direction of drainage.

The above information about the mason decoration construction process and the decoration of the mason will be briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.

Masonry decoration note

3 Inch Stainless Steel Casters

3 Inch Stainless Steel Caster, we use high quality 304 stainless steel. It has great anti-rust effect. And Single wheel is TPR material. The model is sold very popular now.


stainless steel caster

stainless steel

3 Inch Stainless Steel Caster,3 Inch Stainless Steel Caster Wheels,3 Inch Stainless Casters

Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com