>>> Links: Secret: Installation of ceilings for aluminum pinboards
Why is the flat top of the bathroom uneven?
Since the pinch plate and its associated frame are formed by pressing from a metal sheet or a plastic, the pinch plate is connected in the form of insert. In order to ensure that the connection is not loose, the size of the connection structure should be relatively accurate, and the adjustment range is allowed. Smaller, higher installation requirements. If the flat-topped frame is not flatly installed or the frame is deformed or the gusset plate is deformed, hard insertion or the like during the installation may cause uneven flattening of the buckling plate.
In order to avoid the occurrence of unevenness on the flat top of the buckle, attention should be paid to the following points during the construction process:
(1) The purchased gussets and their associated frames and fittings shall meet the product quality requirements and must not be bent and deformed.
(2) During the transportation and stacking process, the pinch plate should be laid flat and cannot be pressed, and high temperature and harmful substances should be avoided.
(3) The installation of the frame is smooth and the spacing deviation should be controlled within the allowable range.
(4) When installing the gusset plate, if there are deviations in size, it shall be adjusted in advance and then inserted in order. It shall not be hard-inserted to prevent deformation.
(5) Large lighting fixtures, exhaust fans, etc. shall be provided with separate spreaders. They shall not be placed directly on the flat tops of the buckles.
As long as you pay attention to the above five points, you can basically achieve the decorative effect of the gusset flat top and avoid unevenness. During the construction process, if necessary, observation and inspection may be performed by means of a ruler, hand test, etc.
In addition, the state has a basic acceptance criteria for the installation of ceilings, that is, the types, specifications, and colors of the materials used in the ceiling projects should conform to the relevant specifications of the design; the cover panels and the keel should be closely connected and the surface should be leveled. There shall be no defects such as pollution, cracks, missing corners, hammers, etc. The joints shall be uniform and uniform. The affixed cover panel shall not be delaminated; the shelving cover panel shall not have any leakage, penetration, or angulation, and shall be in direct contact with the wall. The keel of the surface or bathroom ceiling should also be painted with antiseptic. You may wish to agree on this with the decoration staff, once the problem is also well documented.
Buy materials Decoration Design Toilet ceiling materials Bathroom design Toilet ceiling Toilet exhaust fan Bathroom size
Gas Burner & Gas Stove Co., Ltd. , http://www.nshardwares.com