It is difficult for powder engineering and requires a lot of work. Therefore, a high price is reported. From the understanding of the situation, this double-layer sieve with a mesh surface of 215mm mesh in the upper layer of the original single-layer sieve will not exceed the lower layer, and the price will not increase much, and will not exceed 100,000 marks, mainly Mr. Bakele. Reluctant to invest more energy, for them the labor price is very high.
From the technical analysis, if you increase the 12mm particle size product, you only need to change the secondary sieve from single layer to double layer sieve, and get 24kt, 12mm granularity products in one year. This time it will not change, the transformation will be more difficult in the future, the investment will increase, and the plan will have major changes. This time, due to Hong Kong's urgent need for heavy soda ash as soon as possible, we had to cancel the idea of ​​adding a product.
The question of whether the process of distributing the overflow of the screw machine can be changed is mainly to reduce the amount of system circulation. The use of spiral overflow to ensure the filling of the extruder raw materials is good, but increased equipment and transportation. If the separator dust collector and the device dust collector are returned to the alkali storage tank, the flow meter is installed in the vibration chute and controlled by the flow meter to ensure that the extruder is full, thereby reducing the screw conveyor and reducing the overflow. The amount of fine powder in the cycle of 1t / h.
51100 Bearing,51100 Bearing Dimensions,51100 Thrust Bearing,Skf 51100 Bearing
Dongyang City Shuangchi Bearing Co.,Ltd , https://www.zjscbearing.com