Different external insulation systems, the methods used to fix the insulation board are different, some of which are bonding or anchoring the insulation board to the base and some of the bonding of the insulation board to bond the main or the anchorage to bond the insulation board to the base. The variety of adhesive materials varies in different systems. The state of this adhesive material is different when shipped to the site:
1. When the finished glue is used, there is no need to add any other materials. It is neither necessary to re-do the ingredients nor to stir.
2. Add other materials (such as cement) before use.
3, for the single-component powdered material with water before mixing.
4. When the two-component material is used, the mixture is evenly mixed.
Our Tungsten Carbide Tipped Cutters(TCT hole saws) are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer. Say goodbye to burnt out, smoking holesaws. Try a T.C.T. you'll love it.
Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys.
The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.
T.C.T. cutters are the standard for electrical construction, transit work and general metal fabrication. The spring on the pilot bit ejects the cut slug.
With normal care, Tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use
Tct Hole Saw,Tct Cutting Disc,Carbide Circular Saw Blade,Tct Hole Saw Cutter
Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com