The green fruit of tomato is a kind of gluten fruit, which causes a variety of causes of tomato green fruit. The most important one is the imbalance of fertilization, low nitrogen and high potassium, excessive application of nitrogen fertilizer, and relatively low potassium. The main cause of tomato green fruit. After the tomato enters the peak period, it encounters bad weather (low temperature, weak light), or unreasonable fertilization (partial application of nitrogen fertilizer), and it is easy to cause green fruit. The following measures can be taken to prevent:
Adding organic fertilizer, using formula fertilization technology, it is not appropriate to use ammonium fertilizer to adjust the ratio of nitrogen, phosphorus and potassium in the soil to promote the absorption and utilization of potassium by plants. This is the most important measure to prevent tomato green fruit.
Extend the time of seeing vegetables. When the fruit enters the color-changing period, it is necessary to remove the lower leaves and the nearby leaves of the color-changing ear, and increasing the light can reduce the occurrence of the fruit.
Roots and roots enhance plant resistance. Foliar fertilizer containing various elements (boron, calcium, magnesium, iron, zinc), which is suitable for amino acid type, promotes black and green leaves, enhances photosynthesis, increases the absorption of boron and calcium, and can reduce Green skin, cracked fruit, etc.
To strictly control the temperature, the daytime temperature should be controlled at 25 °C - 30 °C, the night temperature should be maintained at 14 °C - 16 °C, and the temperature difference between day and night should not exceed 15 °C.
Balance the number of fruit set in the plant, not too much fruit or too low fruit setting.
The concentration of the flowering hormone in the control point should not be too high. The fertilizer should be added in time after the flowering of the anther.
For the greenhouse where green peel has occurred, high potassium foliar fertilizer and chitin can be sprayed to relieve symptoms.
Non-tapping screws are machine Screw, the pieceworker to be fastened must be tapped with taps in the screw hole in advance to match the screw threads.
The difference between tooth screws and other screws depends on whether they can be used together with nuts. Tooth screws can be used with nuts. And relative to the screws of other teeth, there are self-tapping screws. The nut of this kind of screw has no bow teeth. As for the standard teeth and fine teeth are only different pitch, it is the nut of the machine screw
Hex Machine screw,pan machine screw,flat machine screw,truss machine screw,Hexagon socket screws
Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com