Floor decoration is a large item in home improvement. If the floor does not have a good decorative effect, it will affect the overall effect of home improvement. Today we have come to talk with you about the three major issues that are likely to arise in the renovation of the ground, so that all decoration owners should carefully avoid these problems when they are doing their own floor decoration and do preventive work in advance.
Scholarly aesthetic floor   Flanner sofa
What are the three major problems with floor decoration?
First, cracks in solid wood flooring
After the solid wood floor has undergone a drying process during production, the moisture content originally contained in the floor is evaporated, the space occupied by water in the wood is reduced, and the floor is shrunk. For solid wood floors, this is a normal phenomenon, and cracks are very likely to occur after a period of use.
Solution: In this case, you can re-paving. If no extra floor is left, you will need to repurchase the other floor (because the floor more than ten years ago is no longer on the market); if there is a floor left, it can also be used for paving, you can first put the floor A good floor is laid out in a conspicuous position, and not very good floors are laid out in more concealed locations.
Second, the floor tile cracking
After two years of renovation, the owner of the renovation found that whether in the living room or the bedroom, all the tiles that were cut at the corners of the house were broken radially at the right-angle cutting point, and they were getting worse. Strangely enough, the tiles did not loosen or tilt.
Cause: Cracking of the tile after cutting is a more normal phenomenon. Compared with the whole brick, the overall strength of the tile after being cut will be much lower, so it is easier to crack later. Although the floor tiles of Mr. Peng’s house were cracked after a period of renovation, it was possible that small cracks had appeared after the tiles had been cut, but they were barely recognizable by the naked eye. In the pavement process, workers use rubber hammers to strike on both sides of the tile. If the force is not uniform, the adhesion between the tile and the ground will be inconsistent. With the increase of the strength of the later cement and the increase of the tensile force, it is easy to tear the tile. . This is a problem that is difficult to find during the construction process and only appears during use.
Solution: If the brand decoration company decoration, the owner can contact the original decoration company to repair, replace the damaged tiles, please pay attention to the workers in the re-paving.
Third, floor tiles emptying
The owner of the renovation found that the floor tiles in the living room had two empty bricks at the seams. When they stepped on the tiles, they could feel the tiles swaying up and down. The two bricks were not damaged by external forces. Unconsciously, they became like this. It always feels awkward to go up.
Cause: This problem may have occurred because the wet curing was not performed after the tiles were installed. Generally speaking, wet curing is performed within 24 hours after placing tiles, that is, watering the floor to keep the tiles in a wet state is generally maintained for one week. The cement absorbs enough water to achieve the required strength. If the wet maintenance is not done, the ground will be in an extremely dry state. If there is a pot of water or a water pipe running during the use, the tiles will undergo some changes. In addition, it may be the quality of the tiles. If the density of the surface of the tile is not enough, after a long time stamping, the tile will naturally separate from the concrete floor, while the other parts still have strong adhesion, and it will empty and tilt at the dislocated part.
Solution: If the owner's home still retains the remaining tiles after the renovation, you can replace the tiles that are in question. Tiles on the market are currently being updated very quickly. It also reminds owners who are renovating that they should buy some of the main materials, such as tiles, for use in later maintenance.
Precautions Tile Entrance Decorating Cement Decorating Decoration House Space Decoration Looking for Decoration Company How do you fit the living room floor tile function sofa bed function sofa small bedroom floor tile
LED Downlight
LED downlight ,with LEDER technology's smooth design is an enhanced and modernized retrofit light. Using a secure and reliable installation method, this light is compatible with housing that features interior spring bracket holders.
Built with steady dimmable technology, and compatible with most modern dimmers including wireless systems. LED Downlight is an especially good choice for anyone looking for a lamp which is elegant in an understated way. If you want an LED Downlight that discreetly keeps itself out of the way, yet looks great once you actually pay attention to it, you have definitely come to the right place. This LED Downlight will do its job very well.
Features:
• Grace design
• Easy to install
• Excellent power saving
• Suitable for operation at low temperature
• Color temperature :3000K-6000K
• Body color can be customized as RAL Code
• Type of protection: IP20 / IP65 (Some models)
• Warranty: 3 ~ 5 years
Our Downlight is compatible with dimmer switches, so you can always get just the right light for dinner or game night. Bring effortless light into your kitchen, bathroom, or living room with this.
We have rich production experience in lighting.Except LED Downlight , we also offered other product in Indoor Lighting .Such as :
LED Panel Light , Track Light , Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
Recessed Downlight,LED Recessed Downlight,Halo Ultra Thin Downlight,Surface Mounted Downlight
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightoutdoor.com