Many consumers believe that personally designing your own home to make it personal is a very fulfilling experience. However, almost every family that has finished the renovation will have some regrets, either because of poor design or negligence in the decoration, leaving "sequel." Especially in the bathroom, don't underestimate this inconspicuous place. Without a complete design, the decoration here will also be a mess. This function-oriented, plumbing and electric space is at home in the difficult, decoration design, sanitary ware selection, construction quality, which can not be vague. Whether it is a decoration company or a consumer, as long as you pay little attention, you will leave a “dead corner†and add trouble to your future use. The "dead ends" mentioned here mainly include the following three aspects:
One: Did not consider the installation before buying, bought and found not only beautiful, use is not convenient.
According to reports, in recent years, consumers have become more and more willing to spend money on bathroom renovation, and in addition to construction, follow-up investment is also very large, usually only the cost of buying sanitary ware will probably account for 1 / 1 of the total amount of decoration. 8 or so. As a variety of bath products variety, the price varies from a few hundred dollars to a dozen yuan a huge difference, consumers buy in the home improvement market, often pick their eyes, buy home only to find that their bathroom is not coordinated . For example, the hand-wash basins on the market are very beautiful, but when they buy their homes, they find that they are too big. They invaded part of the toilet and made the tissue box and the trash can not “seat each one.†The result is that It is not very convenient at every "convenience".
Experts advise: Consumers are best to consider in the end of the design phase to buy what kind of product, in the construction can be in accordance with the specific installation requirements and technical parameters of the selected products to reserve space, change the pipeline, create installation conditions, ensure the decoration The process can be successfully completed and sanitary products can be installed and used normally.
The second one is that before the start of construction, it is not well thought out, and as the construction is being revised, there is no plan to find the transformation of the water circuit, leaving hidden problems for the subsequent construction.
Under normal circumstances, the decoration company will draw the decoration design drawings for the owners, including the overall renderings, detailed construction drawings and water circuit transformation plans. However, due to inadequate communication between the owner and the designer in advance, the owner did not consider it properly. With the progress of the construction, he proposed amendments to the original design. As a result, the construction of the concealed works, such as the alteration of the water circuit, was found to have no plans. , leaving hidden dangers for subsequent construction.
Mr. Zhang is so, during the construction process to modify the original design, when he later installed the bathroom mirror, towel rack but found that in the face of the wall can not start, I do not know which tiles hidden under the wire duct, he can only The decoration workers slowly recalled together and tried to avoid the embedding, but even so did not survive.
Experts advise: When there are water circuits in the bathroom that need to be remodeled, consumers should ask the designer for a circuit renovation plan in advance. If there is any change in the construction process, consumers must communicate with the designer and draw a remodeling plan. Then start the construction, it is best not to modify it while construction, so as not to injure the electric wires in the future when the construction of the wall will cause disasters.
The third: The design is not flexible, and a slight error in the construction will cause a series of rework.
This situation is more common in the bathroom. If the socket on the wall is fixed, it is found that the height of the ceiling is exactly in conflict with it, but at this time the tiles have been attached and it is difficult to change. Also, if the washbasin is in place, it is found that the pipeline cannot pass through, and only a few more bends are required to pass through the bathroom cabinet.
Experts advise that consumers must consider whether the existing design solutions and future construction are feasible and flexible before they purchase sanitary products. If the faucet needs to embed a suitable water supply pipe, the bathroom cabinet requires sufficient space for installation. The toilet seat needs to consider the wall distance. The shower room needs to consider the load-bearing wall and the location of the floor drain. These conditions must be met in the home improvement construction. Caixing, otherwise sanitary products can not be installed and used.
Bathroom Villa Design Entrance Decoration Space Bathroom Home Decoration Design Home Decoration Decoration Ceiling Rendering Decoration Finding Decoration Company Okay Bathroom Decoration Rendering Tile Price ld Tile
Grinding is a kind of disc grinding products, is the use of high voltage electrostatic field force, the fine grinding grain (alumina or silicon carbide) rooted in high-strength polyester film, the sand all the knife outwards, sharp cutting, can provide higher grinding efficiency and careful polishing effect, and then pass back velvet, cutting processing
Behappy high grain concentration for agressive cutting action and smoother running wheels
Grinding Wheels,Flap Disc Grinding Tool,Zirconia Grinding Abrasive Tool,Grinding Wheel Grinding Tool
Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com