Butterfly valve failure and elimination methods: possible causes of the failure to eliminate the sealing surface leakage 1, the butterfly plate, sealing surface folder debris 2, butterfly plate, sealing surface close position match is not correct 3, the outlet side configuration flange bolt by Force uneven or not according to the requirements of Figure 1 4, the pressure test direction is not required according to Figure 1 1, to eliminate impurities, cleaning the valve cavity 2, adjust the worm or electric actuator adjustment screw to close the valve position correct 3, Install flange plane and bolt pressing the country, should be evenly pressed 4, press the tip sealing direction of the valve leaked on both ends 1, both sides of the gasket failure 2, pipe flange uneven or not compressed 3 , The seal ring, the seal gasket failure 1, replace the seal gasket 2, compacting the flange bolts (uniform force) 3, remove the valve pressure ring, replace the seal ring, failure washer
Microcentrifuge Tube
High-performance microcentrifuge tubes, optimized design, and high-performance quality help protect your samples. Microcentrifuge tubes are made of polypropylene (PP) and are highly mechanically stable, ensuring your samples are stored, run and centrifuged worry-free.
Microcentrifuge tubes have a maximum centrifugation tolerance of 25,000 x g and are autoclavable (20 minutes, 121°C). The centrifuge tube adopts a snap-on tube cover design, which can be operated with one hand and has good sealing performance, which can effectively prevent liquid leakage; the tube wall is smooth, and the tube body is designed with a frosted area for convenient marking.
microcentrifuge tube sizes,microcentrifuge tubes 1.5 ml,microcentrifuge tubes uses
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyue-tube.com
