Seco's Duratomic coating technology and the new material grade TP2500 have stood out among the many competitors and won the Ringier Technology Innovation Award.
The Duratomic coating is the first coating on the atomic level. The basic structure is alumina (Al2O3), and the overall ductility of the coating is also significantly improved. It exhibits a significant increase in ductility (toughness) and heat/wear resistance, as well as unique surface characteristics that reduce the tendency of built-up edge formation.
The TP2500 is the first product to feature an excellent Duratomic coating, and its high wear resistance and toughness are the preferred material grade of choice for all steel turning applications in excess of 80%. Not only is it a new level of turning material, but it also indicates that the next generation of carbide inserts made with Duratomic technology will make a significant contribution to the development of metal cutting performance, and it will surpass all existing products on the market. ability.
The advantage of the plastic centrifuge tube is that it is transparent or translucent, its hardness is small, and the gradient can be taken out by the puncture method. The disadvantage is that it is easy to deform, has poor corrosion resistance to organic solvents, and has a short service life.
Plastic Centrifuge Tubes have caps, which are used to prevent sample leakage, especially when used for radioactive or highly corrosive samples. It is very important to prevent sample leakage; the tube cap also has a function to prevent sample volatilization. And support the centrifuge tube to prevent deformation of the centrifuge tube. When choosing this point, you should also pay attention to check whether the tube cover is tight, and whether it can be tightly covered during the test, so as to achieve the inversion without leakage;
quick seal centrifuge tubes,laboratory centrifuge tube,pcr tube centrifuge,plastic centrifuge tubes
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuecultureflask.com