The method that people usually adopt is to personally stare at the site so that problems can be solved in time. In fact, if it is an outsider in the decoration, even if it is soaked in the construction site every day, problems cannot be seen. For those who suffer from lack of time, "staring at the site" is even more unrealistic.
If consumers can grasp the progress during the renovation process and carry out inspections in stages, they can avoid the pain of going around and control the quality of construction.
Check before acceptance to see whether the demolished and reformed project is in accordance with the contract, whether there are hidden safety hazards, whether the wall surface treatment is clean, and whether the quantity, grade, and specifications of the incoming material are in agreement with those agreed in advance.
The acceptance of the second stage of acceptance of the water circuit should be a single acceptance of the waterway and circuit transformation. Consumers should check whether all the transformation lines are unobstructed, whether the layout is reasonable, the operation is normative, and re-operate under the professional hydraulic or electrician operation. Confirm the actual size of the circuit modification. Only after the line is changed, the putty worker can continue to seal the wall and putty.
According to the drawings, the acceptance of the carpentry work size shall be completed after the third acceptance of the carpentry foundation. At this time, ceilings and plaster lines in the room shall also be completed, and the kitchen and bathroom wall tiles shall have been attached. The painted wall should be scraped twice. Acceptance work at this stage is very important, consumers should carefully check the drawings, confirm the size of the various parts, if found inconsistent place, promptly prompt the construction team to modify.
Carpentry job quality acceptance When all the fine wood products are decorated with decorative panels, after the wood line is nailed, consumers can carry out the fourth phase of acceptance. This time is basically half of the time, the inspection of this stage should focus on the color and texture of wood products and large areas of flatness and gaps are uniform.
After the completion of wood products, oil workers can start the primer treatment work, and all floor tiles should also be posted in this stage, which is the fifth stage in the phased acceptance.
The acceptance of the final stage of acceptance after completion is the most comprehensive and thorough. Consumers are required to check the installation of footboards, sanitary ware and hardware, whether the finish of wooden products is in place, whether the paint on the wall or top surface is uniform, whether the panel of the electrician is properly installed and the position of the light fixture, and whether the circuit connection is correct. In addition, consumers should require the construction team to clean the room thoroughly before moving back.
The acceptance stage is not absolute in the actual construction. Different families have different requirements for the decoration content. The construction progress will naturally have corresponding adjustments. Consumers can flexibly grasp the progress of the project.
Entrance decoration decoration company paint room home decoration house decoration paint bathroom ceiling material bathroom ceiling bathroom floor tile bathroom size
Tempered Glass is often used in applications where using standard glass could pose a potential danger. Tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because it can greatly minimize potential danger in the case of a break. Manufactured through a process of extreme heating and rapid cooling, tempered glass is much harder than normal glass.
In the case that tempered glass does break, it shatters into small pebbles that are void of dangerous, sharp edges. As tempered glass is considered to be much safer than normal glass, you may often here it referred to as safety glass or TOUGHENED GLASS . Tempered glass has a wide variety of uses that you'll find just about everywhere. In fact, the shower doors in your bathroom or the side glass on a motor vehicle are examples of tempered glass.
Annealed float glass mainly clear float glass, ultra clear float glass, color tinted glass, they are substrate, can be processed into tempered glass, Laminated Glass , Insulated Glass , LOW-E glass, Frosted Glass , Back Painted Glass, Printed Glass , coated glass. Tinted glass mainly brown, grey, blue, green, and also black, black is less. It can be processed into color tinted tempered glass, Colored Laminated Glass, Colored Insulated Glass and so on on customer's request., can be used for windows, doors, glass walls, fence, railing, shower room, furniture, industrial and so on.
Balcony Tempered Glass,Tinted Window Glass,Tinted Glass For Window,Heat Strengthened Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com