It is understood that the technology is to mix the stone waste slurry, shale, coal and other additives (including 25% of the total proportion of stone waste slurry), stir it through the brick casting machine, and then enter the brick kiln to produce the sintering. Ordinary bricks and sintered hollow bricks. After sampling inspection by the product quality supervision and inspection department of our city, the bricks added with stone waste slurry meet the relevant standards and pass the inspection.
According to reports, the products produced by this method have the following advantages compared with ordinary shale bricks: geometric size standards, with a good finish; each brick weighs about 10% lighter than ordinary bricks; the compression effect is stronger than ordinary bricks And no radioactive material.
NANSHAN powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. All NANSHAN fasteners with .300 head will fit into tools with 8mm barrels.
We maintain only the highest standards in the materials, production
techniques and quality control measures used to manufacture our fasteners,
assuring consistent, optimum quality in every fastener.
NANSHAN Drive Pins can be used for the powder actuated tools and gas actuated tools of
NANSHAN®, POWERS®, RAMSET®, HILTI®, SIMPSON® and BLUE POINT FASTENERS®.
Drive Pins,Drive Pins For Faster Tool,Drive Concrete Pin,Drive Pin Fastener
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com